For those that did the swap, i'd like to know what axels you guys are using? Recently I did my JDM H22a swap with LSD trans and i got it installed by Paul(NVA-AV6). Well everything went well except for my passenger side axel. Paul mentioned that since i was pretty low that the axels were binding or something like that lol because i was low but said that he would have to modify the passenger side axel to allow me to remain low. Well all in all he shortened the pass side axel and now its been day 2 so not sure how long they will last but just want to know what axels people used because i've never heard any issues with axels for the h22a swap lol.
JDM H22a Swap Axels
- Thread starter Milkman
- Start date
b18lsturbo
Active Member
I used accord on my swap.everything stays accord on drivetrain but trans
FunnyVictor86
Well-Known Member
I don't follow, are you using your f series axles or h series axles?
FunnyVictor86
Well-Known Member
jdmcg3
Well-Known Member
either or axles can be used.. it just all depends on what half shaft is used. if you use a prelude one.. then you gotta use prelude axles.. and same with accord.
but most of us just use the accord axles since we already have that.
but how did he shorten your axle? never heard of that.
but most of us just use the accord axles since we already have that.
but how did he shorten your axle? never heard of that.
Elite1JDM
Well-Known Member
Maybe you should just run the accord half shaft and driver side axel. To solve that problem. Ive never had any trouble with my ride being pretty low!
