Junkyard run II March 9

BadgerType

Resident ***hole
Joined
Dec 16, 2005
Posts
9,048
Reaction score
52
Location
SW FLA
I am heading to the junkyard where they seem to have a nice wid selection of parts.

I can't get every part and if i know i can get the part, we will work out a price prior to me going to the yard

I can't/won't ship seats, motors, body panels. Anything that can fit in a 2'x2' box (Rim box) i can do

LIST SO FAR:

alternator. 4cyl f23a1 deposit required ~30 bux plus shipping
Coupe driver side window regulator x2 ~20 bux plus shipping
tan center armrest x2 ~30 bux plus shipping
brake & clutch pedals
clutch master & slave cylinders
plug in the spare tire compartment
Drivers side mirror for 01-02 LX sedan Hopefully satin silver deposit recieved
Hood Struts - 02 Accord V6 Sedan or 00 tl ~15 plus shipping
satin silver windshield washer nozzles
 
Last edited:

LX_F23A1

Well-Known Member
Joined
Jun 7, 2009
Posts
1,504
Reaction score
4
Location
Chicago
I need all the plastic clips that hold the lining in the trunk....lol

Fender clips. and possibly alternator. 4cyl f23a1
 

BadgerType

Resident ***hole
Joined
Dec 16, 2005
Posts
9,048
Reaction score
52
Location
SW FLA
those clips......maybe, but most likely not

alternator i could do, but money would have to be up front
 

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,616
Reaction score
165
Location
Fawking, OH
I could use a tan center armrest if you find one in good condition. Also could use a few CL-S parts, so if you happen to find one just give me a call (looking for brake & clutch pedals, clutch master & slave cylinders)

Oh I also need the plug in the spare tire compartment that keeps water out.
 
Last edited:

dcmystery21

Well-Known Member
Joined
Jul 27, 2009
Posts
678
Reaction score
1
Location
Greenville, SC
i need those weired bolt things that hold the trunk lining to the side of the car. they are located near the trunk seal. there are 2 of them. i know on the driver side, it holds the net. let me see if i can find a diagram...

2001HondaAccordTrunk208.jpg

(not my car)

this is where they are located in a regular trunk. they are not shown in the picture, but that is where they are in a regular trunk.
 
Last edited:

BadgerType

Resident ***hole
Joined
Dec 16, 2005
Posts
9,048
Reaction score
52
Location
SW FLA
Coupe driver side window regulator?

That should be doable

I could use a tan center armrest if you find one in good condition. Also could use a few CL-S parts, so if you happen to find one just give me a call (looking for brake & clutch pedals, clutch master & slave cylinders)

Oh I also need the plug in the spare tire compartment that keeps water out.

there was only one, stripped cl-s there last time, so i will see what i can do. same with a good clean armrest

i need those weired bolt things that hold the trunk lining to the side of the car. they are located near the trunk seal. there are 2 of them. i know on the driver side, it holds the net. let me see if i can find a diagram...

myabe......i tend to break those plastic clips, lol
 

dcmystery21

Well-Known Member
Joined
Jul 27, 2009
Posts
678
Reaction score
1
Location
Greenville, SC
That should be doable



there was only one, stripped cl-s there last time, so i will see what i can do. same with a good clean armrest



myabe......i tend to break those plastic clips, lol

its not a plastic clip. its like a bolt with a plastic cap that you can hook stuff on. they bolt into the trunk to hold the liner flush. they are pretty much behind the side tail lights.
 

2000BlackCoupe

Well-Known Member
Joined
Sep 10, 2010
Posts
7,569
Reaction score
219
Location
where
if you happen across another driver side window regulator thatd be swell. any idea about how much it would cost? i can get a new one for $55
 
Back
Top