F23A1AT
Well-Known Member
Just picked up a wing for my sedan, I'm not too sure if I know how to install it right. help plz.
1) The spoiler comes with heavy duty springs, because the stock ones aren't strong enough to "pop" the trunk. I run the regular ones and they're fine, just no "pop"
2) How long are the sticks? They might be the springs
3) There a little "bubbles" on the trunk where you center punch and drill with a 3mm, 6mm, then 8mm bit. You must centerpunch the bubbles! Then make a template to find where the 5th hole goes (for the wires).
4) There should be a wire coming out of the spoiler that plugs into the connector that used to plug into the high mount light in the rear window.
Hope this helps.