Just wondering if accord brakes are pressurised. Recently changed rear pads on project car as they were disintegrated from lying up and brakes now feel spongy and I am not confident in there stopping ability. Maybe its just a case of bleeding system? Or maybe it has something to do with abs, as light is on? Any suggestions?
Pressurised brakes??
- Thread starter Rastaj
- Start date
kn0x47
Senior Member
probably air in the line but if the light is on then find out why
Wht00Accord
Well-Known Member
- Joined
- Sep 2, 2014
- Posts
- 291
- Reaction score
- 0
You may have no brake fluid in the master. Which makes the light come on.
Pull wheel.
watch as some one pumps
see any fluid?
fix
see any swelling (line)?
fix
press & hold, same pressure, travel to floor?
replace master cyl
Stay but too far?
bleed. Do this every ~3 years, fluid -Should- be almost clear, more yellow is how dead it is
watch as some one pumps
see any fluid?
fix
see any swelling (line)?
fix
press & hold, same pressure, travel to floor?
replace master cyl
Stay but too far?
bleed. Do this every ~3 years, fluid -Should- be almost clear, more yellow is how dead it is
