Problem with front passenger seat (01 ex coupe)

nathan007

Well-Known Member
Joined
Nov 16, 2007
Posts
120
Reaction score
2
Location
Montreal
Hey fellas!

I got a little problem that started friday with my 01 ex coupe (cloth interior, non power seats) front passenger's seat.

It used to operate normally, but without any warning, it wont slide completely to the back (foward/backward motion). There seems to be at least 6" of travel missing. The rest will operate normally, but i cant get it to go slide completely to give max leg room.

I tried to check if anything was obstructing the rails, nothing. The lever mechanism works fine. When i push the seat towards the back with the lever in "free mode" It will stop as if it would normally when you are at the maximum of travel allowed. Only, it's really not as far as it should be.

Anyone have an idea of what could be the problem? This is pretty annoying..
 

finch13

Well-Known Member
Joined
Apr 2, 2008
Posts
5,025
Reaction score
41
Location
Twin Cities, MN
Check to see if the bushing is worn.

93011511.gif
 

nathan007

Well-Known Member
Joined
Nov 16, 2007
Posts
120
Reaction score
2
Location
Montreal
found the problem, a dash trim screw that fell last time i worked in the area lodged itself in the console-side rail. Problem solved!:Smoker:
 
Back
Top