FS: ***Quad Retrofit*** S2k/Morimoto

[001Stunna]

Any pictures of the backs? low beams/high beams on?
Any fogging issues after car washes//heavy rains?
Do they still maintain full adjustability horizontal and vertical?
How are the projectors mounted(screws, glue, JB Weld, brackets)?

 

[RICKDIGILER]

Any pictures of the backs? low beams/high beams on?
Any fogging issues after car washes//heavy rains?
Do they still maintain full adjustability horizontal and vertical?
How are the projectors mounted(screws, glue, JB Weld, brackets)?

Yes,
yes,
been through plenty of washes and no fogging. No heavy rains yet,
fully functional,
epoxy.

 

[001Stunna]

Yes,
yes,
been through plenty of washes and no fogging. No heavy rains yet,
fully functional,
epoxy.

So there is no screws at all holding the projectors to the reflector bucket except epoxy?

 

[Jimsun]

so guso. If only i was rich enough... but i need to take care of suspension first.

 

[RICKDIGILER]

So there is no screws at all holding the projectors to the reflector bucket except epoxy?

Yes, only jb weld... I've never used screws on any of my retrofits.

 

[001Stunna]

Yes, only jb weld... I've never used screws on any of my retrofits.

wish you had, wouldve had this possibly sold lolz
jb weld + constant hot/cold changes + all the shock from **** roads = cracks and loose projectors (at least in my experiences)

GLWS man; wish i had the time and will to tear them apart and screw the projectors on and reassemble them.

 

[Chris Vu]

Gorgeous.

 

[Sunoveabesh]

Bump for a friend
-Also the guy who taught me how to do retrofits...knows his stuff

 

[RICKDIGILER]

Bump...

 

[RICKDIGILER]

Price drop bump