rear spring loose on oem strut tower

[9450erick]

i recently purchased some neuspeed springs for my rear drop.
the rear has been horrible for me.
as many know i posted on how to get the rear struts out.
now that i did i put the rear neuspeed springs on and there hella loose i mean i can wiggle the whole spring.
i thought it was supposed to fit tight.
wat should i do? is it supposed to be loose? will the wirght of the car just squish it down? are the springs worn out?
im putting these on my 4 door accord 2.3L and definately got them for 4cl.
please help

 

[Sketch o5]

is the car jacked up while youre checking how tightly theyre seated?

 

[CG6Lemon]

lol only way u can wiggle it loose is that u jacked that shyt hella high up.

 

[NashvegasCG]

there is no pressure.... of course its that loose

 

[9450erick]

there not on the car yet there just chillin on the strut tower. i thought they were supposed to be compreesed a little.
i thought they were supposed to fit like my front springs where there is no wiggle room or looseness(progress springs on front)
you guys are saying its fine if it loose

 

[CG6Lemon]

i guess the seller loosened it for u and managed lazyly assembled it back, but not completely assembled properly.

 

[finch13]

What Lemmie? He's assembling them himself. Do the springs have "dead" coils? Ones that are spread far apart at the top? Those are to provide pressure when the suspension is completely uncompressed so there's no clanking. On my springs I can assmelbe the rears without a compressor and just compress the spring far enough by hand.

 

[CG6Lemon]

fck i just wrote some engrish.... i guess im tired from my 6 pg final i did....

 

[9450erick]

What Lemmie? He's assembling them himself. Do the springs have "dead" coils? Ones that are spread far apart at the top? Those are to provide pressure when the suspension is completely uncompressed so there's no clanking. On my springs I can assmelbe the rears without a compressor and just compress the spring far enough by hand.

take a look for urself
Both pics are the same strut/spring

is it supposed to sit like that.
in the second pic you can c i can take the whole spring out of the assembly
in the 1st pic u can see the top of the spring (barely)

 

[juicebox00]

yes, that is perfectly fine. now put it on your car