RL caliber brackets need help

[Jdmj30a1]

Installed one side and the caliper is rubbing on the rim I have a 17 by 9 rpf1 with 35 offset.
Do the brackets have a right and left side?

 

[xci.ed6]

pull a caliper, look at wear pattern.

 

[Jdmj30a1]

They're new reman

 

[Varnell]

The brackets I have look identical. I'm a little concerned about rubbing as I have 18x8.75 +20mm wheels. You might just have to get 5mm spacers.

 

[Jdmj30a1]

I gave up no more bbk

 

[xci.ed6]

oh, hits spokes not he rim? Yeah, spacers...I have pulled off a few washers on the wheel studs to act as spacers before.

I thought you meant the rim then I would leave it jacked and drive/brake to wear the pads then look, it doesn't need much to see.

 

[Jdmj30a1]

I tried also with 18x9.5 +20 chikaras and it cleared the barrel but not the spoke. Smh I guess I wont be using them and im going to be selling the rotors and bracket

 

[Varnell]

^doesn't bode well for me, either. Maybe with the spokes being concave I'll have better luck.

Don't give up on the bbk. Run small spacers.

 

[Jdmj30a1]

I did on the rpf1s but it still touched the barrel. And on the chikaras no spacers its sticking out alot already.

 

[Varnell]

Anyway, you could post some pics? It's hard to believe the 9.5 +20mm won't clear.

The guy I bought mine from was running them on 18x8.75 +35mm XXR 527's.