TL-S Sway Bar

[tunerbum147]

TREVOR! hey buddy

 

[Tjohn15]

For some reason I can't seem to find any of our vendors on here.. a little help please?

And as far as the TL RSB kit from our vendors, is it essentially the same 20mm bar or is there any difference?

 

[001Stunna]

http://www.hondacuraplanet.com/mm5/...Code=HAP&Product_Code=TLSWAY&Category_Code=SP

or order directly from

http://oemacuraparts.com but its about $1 more.

 

[Tjohn15]

thank you sir

 

[snip33r]

http://www.hondacuraplanet.com/mm5/...Code=HAP&Product_Code=TLSWAY&Category_Code=SP

or order directly from

http://oemacuraparts.com but its about $1 more.

all i need is OEM End Links? just confirming
Thanks in advance

 

[jwong512]

all i need is OEM End Links? just confirming
Thanks in advance

Brackets and bushings. Endlinks only if your car has been through some rough weather. However, considering how old our cars are most likely the endlinks won't come off that easily and you could have to cut them off.

 

[001Stunna]

Brackets and bushings. Endlinks only if your car has been through some rough weather. However, considering how old our cars are most likely the endlinks won't come off that easily and you could have to cut them off.

If you clicked the link you'd see the following is included

04-07 Acura TL 6MT 20mm rear sway bar kit. Kit includes 52300SEPA11 (bar) 52306SEPA11 (Bushings, qty 2) 52308S3MA00 (Brackets, qty 2)

All he needs if he wants is endlinks, since its a 50/50 chance his might be hard to come off and be reusable.

 

[GoldnKnight22]

I'd get em.... OP lives up by you, right Levin? If so, better than 50/50 chance that rust/corosion has gotten the better of them.

OEM endlinks or Moogs. Your call.

 

[jwong512]

If you clicked the link you'd see the following is included

I do know that the bushings and brackets are included. I just stated that he needs those too incase he decides to buy it from somewhere else. Don't try bashing me and being a smarta** with me. I'm the one that mentioned he should get the bar from our vendor because it's cheaper and has everything included.

 

[001Stunna]

I'd get em.... OP lives up by you, right Levin? If so, better than 50/50 chance that rust/corosion has gotten the better of them.

OEM endlinks or Moogs. Your call.

Kevin, OP doesnt but snip33r does, actually discussed this with him at our last weekly meet.
As for endlinks i have the moogs and even though they are all great and beefy, one thing i dont like about them is the fact that the rubber isnt sealed on the body. hence if enough flex happens the rubber moves to the point where dirt can enter inside and mix with the grease

I do know that the bushings and brackets are included. I just stated that he needs those too incase he decides to buy it from somewhere else. Don't try bashing me and being a smarta** with me. I'm the one that mentioned he should get the bar from our vendor because it's cheaper and has everything included.

Easy there Nancy, i simply corrected what was wrong.
...and he quoted the oemacuraparts link and asked if all he needs else is endlinks? how in this earth did you think that he meant he was asking as hes buying them elsewhere??? lolz. Anyz pm me if u want to discuss this further


Edit: Lmaooo awww you got butthurt and left me rep lolz...heres a cookie

..uhoh you lost it!!!