UPDATE!!! 3/17/12 x5carl3tmurd3rx's Turbo build

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

^ You should really take time to do the mounts. Especially, right while everything is out and accessible. Either you decide to do them and deal with some vibes, or leave them stock. But probably now would be the best time to take care of it if your decision swings that way..

yeah I was thinking more about it today when I was sitting in the bay re-wrapping the engine harness. I might do it. What would be the best thing to use that's readily available to fill the mounts? I don't wanna wait to get the urethane cause I don't have the time.

 

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

bearings are here. about to go to advance to see if they have that window weld **** so I can fill the mounts tonight at my buddy's house after class.

 

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

lol fedex guy just came again with my new hks turbo timer

 

[greekpizza]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

were are the pics i wanna see!!

 

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

lol I haven't taken any yet. I'll take some pics of the mounts when I fill them tonight. and I'll try and bring my camera tomorrow to get some pics of the engine bay with the motor out and the harness re-wrapped and snap a few of the motor while I put it together.

 

[greekpizza]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

ok cool.
btw after you finish yours your helping me do mine (non negotiable)lol
jk but my buddy is hooking me up with a free turbo (Yes it is chinese but brand new) also has bov and wastegate but im scrapping the wastegate and going with a tial cause i dont want my motor to go boom! but i just wanna do a stock internal turbo build.
p28
450 dsm blue tops
and then run like 5psi i think should be safe.
so u down to help me this spring?

 

[sikjdm]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

pics or you ain't got ****


:hides:

 

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

ok cool.
btw after you finish yours your helping me do mine (non negotiable)lol
jk but my buddy is hooking me up with a free turbo (Yes it is chinese but brand new) also has bov and wastegate but im scrapping the wastegate and going with a tial cause i dont want my motor to go boom! but i just wanna do a stock internal turbo build.
p28
450 dsm blue tops
and then run like 5psi i think should be safe.
so u down to help me this spring?

$$$$$$

pics or you ain't got ****


:hides: <------CHU FAIL!!!!

**** you kevin!!

 

[greekpizza]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

$$$$$$



**** you kevin!!

ha not as much as you. mr. student loan turbo build. lol.
im thinking it will be like almost 2k with a tune if im lucky and then me and you can be like the twins, except my car will be a lot slower.

 

[x5carl3tMurd3rx]

Re: x5carl3tmurd3rx's Turbo build [updated 11-28-10]

ha not as much as you. mr. student loan turbo build. lol.
im thinking it will be like almost 2k with a tune if im lucky and then me and you can be like the twins, except my car will be a lot slower.

lol no I was saying I'll help you if you pay me lol. I got loans to pay off so I'm not working for free for anyone.