ChileanMonkey
Member
- Joined
- Oct 12, 2007
- Posts
- 18
- Reaction score
- 0
Well if anyone remembers I had brake problems from my previous post. Well now I'm going to replace my semi-metallic pads, with stock OEM pads. well I open up the box and there's 6 brake shims and there all different, one pair even feels of different material. Does anyone know which ones goes where. I'm looking at the DIY brake pads tutorial, and there's a picture. http://www.filtsai.com/accord/brakes/old_vs_new_parts.jpg . From the picture it seems as if the inside brake pad has another added shim on it and then u put the stainless steel shim on top of that, the other brake pad has only one shim on it. Is My Assumption correct or am I a dumb ***. Thanks for my dumb question.