tdoggs01v6
Well-Known Member
Hello everyone, thanks for reading and giving any input. I am always on and off the site, I don't post very often, but here is my build. I have a 2001 ex with 182xxx miles. The motor and auto transmission have been running very strong. I purchased the car with 124xxx and have had very minimal issues. Over the past couple years and monthes I have been purchasing parts and doing some reading between 6thgen and v6p. I have always wanted to do the 6MT swap and came across parts without having to reach out very far. I purchased an 03 Oddysey motor for a reasonable price. Then came across a CL-S 6MT. Which I also got the 03 CL-S engine harness, ECU computer with a piggyback on it, and the interior firewall/dash harness with the transmission. The rest of the parts I bought new from Acura and Honda Majestic.
Pictures will be posted at some point when I have everything sorted out.
Here is my list of parts that I have bought for the swap.
Acquired Parts
Need to Purchase Parts
Engine: 2003 Honda Oddysey J35A4 with 112xxx miles with engine harness
missing alternator, power steering, and computer.
Transmission: From 2003 Acura CL-S 82xxx miles.
2003 CL-S engine harness, interior firewall/dash harness, ECU with some standalone programmer
Clutch pedal, brake/gas pedal assemblies got from junk yard
This list I copied from one of the swap guide threads and went through piece by piece.
Acura Parts
('03 Acura CL-S 6sp Manual)
?????-???-??? Transmission Assy.
22100-PGE-026 Flywheel
22105-PGE-305 Clutch Set purchased Exedy Pro-Kit Clutch Set
44306-S0K-C11 Driveshaft Assy L using stock
44305-S0K-C11 Driveshaft Assy R using stock
31200-PGE-A11RM Motor Assy., Starter came with transmission
44500-SS8-A01 Intermediate Shaft using stock
50805-S3M-A03 Rubber,FR Transmission Mounting
50806-S3M-A03 Rubber,RR Transmission Mounting
50809-S3M-A00 Transmission Mounting Beam
90371-S87-A00 Nut, Flange (10mm) (Qty 4)
95701-10035-08 Bolt, Flange (10x35) (Qty 3)
95701-10085-08 Bolt, Flange (10x85) (Qty 2)
50827-S3M-A00 Bracket, RR. Engine Mount
90167-SL0-010 Bolt, Flange (10x70) (Qty 4)
90166-S3M-A00 Bolt, Flange (12X25)
Clutch Parts
46922-S3M-A01 Master Cylinder Assy., Clutch
46930-S3M-A01 Cylinder, Slave
46960-S3M-A01 Pipe A, Clutch
46970-S3M-A01 Pipe B, Clutch
46980-S3m-A01 Pipe C, Clutch
46961-S3M-A02 Hose, Clutch
46394-S04-003 Clip A (Qty 2)
46392-SL0-003 Clip D
46972-S6F-E01 Clamp, Tube(D12) (Qty 2)
90651-538-000 Clip, Brake Hose (Qty 2)
90106-S84-A40 Bolt-Washer (8x40) (Qty 2)
46971-S3M-A01 Tube, Clutch Fluid
46965-S5A-013 Tank Assy., Clutch Fluid
28250-PYZ-003 Solenoid Assy., Selector Lock
90011-PGE-000 Bolt (12mm) (Qty 8)
90034-PRC-000 Bolt, (12 POINT 8mm) (Qty 6)
Shifter parts
54100-S3M-A01 Lever Sub-Assy., Change
24600-PYZ-000 Stay, Change Wire included with part above
95701-08055-08 Bolt, Flange (8x55) (Qty 2)
95701-08035-08 Bolt, Flange (8x35)
94201-20350 Pin, Split (2.0x35) (Qty2)
94201-20220 Pin, Split (2.0x22) (Qty2)
93402-06012-08 Bolt-washer (6x12) (Qty 2)
93404-08035-08 Bolt-washer (8x35) (Qty 4)
90557-SF1-010 Washer A, Select Wire (1.6mm)
90558-SF1-000 Washer B, Select Wire (0.5mm)
90555-SF1-000 Washer A, Shift Wire (1.6mm)
90556-SF1-000 Washer B, Shift Wire (0.5mm)
54357-SF1-003 Plate, Change Wire (Qty 3)
54310-S3M-A01 Wire, Change
54118-SC2-000 Washer Assy., Wire
54119-S30-003 Collar, Floating (Qty 4)
54116-SV4-000 Pin, Linkage
54117-S6M-003 Rubber, Floating (Qty 4)
Innovative Motor Mount Kit
Tune Programmer
Honda Parts
('99 Honda Accord 4cyl Manual)
Brake and Gas Pedal Assembly junkyard pick and pull
Clutch Pedal Assembly " "
83414-S84-A01ZA BOOT ASSY., CHANGE LEVER *NH167L*
('03 Honda Oddysey)
19200-P8A-A02 WATER PUMP (YAMADA)
19411-P8A-A02 GASKET, FR. WATER PASSAGE (NIPPON LEAKLESS)
19412-P8A-A02 GASKET, RR. WATER PASSAGE (NIPPON LEAKLESS)
14400-P8A-A02 BELT, TIMING (197YU26 GB-323)
14510-PGE-A01 ADJUSTER, TIMING BELT
14520-P8E-A01 ADJUSTER, AUTOMATIC
18115-P8E-A01 GASKET, EX. MANIFOLD (NIPPON LEAKLESS)
06110-PGK-A11 GASKET KIT, FR. CYLINDER HEAD
06120-PGK-A12 GASKET KT.CYLN.HD.RR
Questions that I have:
Do I still need Rich's harness even though I have CL-S harnesses and computer?
Can I use stock motor mounts? I am most likely going to buy Innovative 60a kit.
What would be the best programmer? And would I have to program my key to the CL-S ECU with it?
Thank you for reading and all the help to everyone of these forums.
Travis
Pictures will be posted at some point when I have everything sorted out.
Here is my list of parts that I have bought for the swap.
Acquired Parts
Need to Purchase Parts
Engine: 2003 Honda Oddysey J35A4 with 112xxx miles with engine harness
missing alternator, power steering, and computer.
Transmission: From 2003 Acura CL-S 82xxx miles.
2003 CL-S engine harness, interior firewall/dash harness, ECU with some standalone programmer
Clutch pedal, brake/gas pedal assemblies got from junk yard
This list I copied from one of the swap guide threads and went through piece by piece.
Acura Parts
('03 Acura CL-S 6sp Manual)
?????-???-??? Transmission Assy.
22100-PGE-026 Flywheel
22105-PGE-305 Clutch Set purchased Exedy Pro-Kit Clutch Set
44306-S0K-C11 Driveshaft Assy L using stock
44305-S0K-C11 Driveshaft Assy R using stock
31200-PGE-A11RM Motor Assy., Starter came with transmission
44500-SS8-A01 Intermediate Shaft using stock
50805-S3M-A03 Rubber,FR Transmission Mounting
50806-S3M-A03 Rubber,RR Transmission Mounting
50809-S3M-A00 Transmission Mounting Beam
90371-S87-A00 Nut, Flange (10mm) (Qty 4)
95701-10035-08 Bolt, Flange (10x35) (Qty 3)
95701-10085-08 Bolt, Flange (10x85) (Qty 2)
50827-S3M-A00 Bracket, RR. Engine Mount
90167-SL0-010 Bolt, Flange (10x70) (Qty 4)
90166-S3M-A00 Bolt, Flange (12X25)
Clutch Parts
46922-S3M-A01 Master Cylinder Assy., Clutch
46930-S3M-A01 Cylinder, Slave
46960-S3M-A01 Pipe A, Clutch
46970-S3M-A01 Pipe B, Clutch
46980-S3m-A01 Pipe C, Clutch
46961-S3M-A02 Hose, Clutch
46394-S04-003 Clip A (Qty 2)
46392-SL0-003 Clip D
46972-S6F-E01 Clamp, Tube(D12) (Qty 2)
90651-538-000 Clip, Brake Hose (Qty 2)
90106-S84-A40 Bolt-Washer (8x40) (Qty 2)
46971-S3M-A01 Tube, Clutch Fluid
46965-S5A-013 Tank Assy., Clutch Fluid
28250-PYZ-003 Solenoid Assy., Selector Lock
90011-PGE-000 Bolt (12mm) (Qty 8)
90034-PRC-000 Bolt, (12 POINT 8mm) (Qty 6)
Shifter parts
54100-S3M-A01 Lever Sub-Assy., Change
24600-PYZ-000 Stay, Change Wire included with part above
95701-08055-08 Bolt, Flange (8x55) (Qty 2)
95701-08035-08 Bolt, Flange (8x35)
94201-20350 Pin, Split (2.0x35) (Qty2)
94201-20220 Pin, Split (2.0x22) (Qty2)
93402-06012-08 Bolt-washer (6x12) (Qty 2)
93404-08035-08 Bolt-washer (8x35) (Qty 4)
90557-SF1-010 Washer A, Select Wire (1.6mm)
90558-SF1-000 Washer B, Select Wire (0.5mm)
90555-SF1-000 Washer A, Shift Wire (1.6mm)
90556-SF1-000 Washer B, Shift Wire (0.5mm)
54357-SF1-003 Plate, Change Wire (Qty 3)
54310-S3M-A01 Wire, Change
54118-SC2-000 Washer Assy., Wire
54119-S30-003 Collar, Floating (Qty 4)
54116-SV4-000 Pin, Linkage
54117-S6M-003 Rubber, Floating (Qty 4)
Innovative Motor Mount Kit
Tune Programmer
Honda Parts
('99 Honda Accord 4cyl Manual)
Brake and Gas Pedal Assembly junkyard pick and pull
Clutch Pedal Assembly " "
83414-S84-A01ZA BOOT ASSY., CHANGE LEVER *NH167L*
('03 Honda Oddysey)
19200-P8A-A02 WATER PUMP (YAMADA)
19411-P8A-A02 GASKET, FR. WATER PASSAGE (NIPPON LEAKLESS)
19412-P8A-A02 GASKET, RR. WATER PASSAGE (NIPPON LEAKLESS)
14400-P8A-A02 BELT, TIMING (197YU26 GB-323)
14510-PGE-A01 ADJUSTER, TIMING BELT
14520-P8E-A01 ADJUSTER, AUTOMATIC
18115-P8E-A01 GASKET, EX. MANIFOLD (NIPPON LEAKLESS)
06110-PGK-A11 GASKET KIT, FR. CYLINDER HEAD
06120-PGK-A12 GASKET KT.CYLN.HD.RR
Questions that I have:
Do I still need Rich's harness even though I have CL-S harnesses and computer?
Can I use stock motor mounts? I am most likely going to buy Innovative 60a kit.
What would be the best programmer? And would I have to program my key to the CL-S ECU with it?
Thank you for reading and all the help to everyone of these forums.
Travis
Last edited: