Search results

  1. I

    Bense's H23A Swap HowTo & Discussion Thread.

    Im running my H23A swap in my 02 accord 5 speed with a PCD ECU from an accord euro-r, The ECU is obd2 and it will pass California emissions testing. This is the best and cheapest ECU to run the H23A with if you are using a Manual transmission, this also allows you to run the original H23A...
  2. I

    H23a Vtec swap

    I'm running my H23A off of a PCD Euro-R ECU, the ECU is OBD2B so it plugged right into my 02 Accord. I wanted to keep my H23A injectors, throttle body, and intake manifold due to the parts being superior to the H22 parts. My car runs mint and is pretty quick.
  3. I

    Euro R CL-1 SWAP

    You passed California Emission's with this ECU?
  4. I

    2012 accord seats

    If the seats do not have side airbags then you would not be able to swap into a 6th gen with side airbags, unless you dont have to worry about inspection, the heated seats are simple to wire up as long as they dont require a body control module. Theres a good chance the seats couldnt almost...
  5. I

    wheel spacers

    What about with 17 inch OEM S2000 wheels all rears, do you think they would be easier to make flush with the fenders?
  6. I

    will i need to roll my fenders on stock rims?

    What about with 17 inch 03 TL-S wheels and wheel spacers, on a moderate drop would I have to roll the fenders? I will probably stretch some skinnier snow tires on them too, but I want to bump out the wheels so there closer to the fenders.
  7. I

    monkeyv6's 2002 Accord Sedan EX V6 *56k*

    What paint did you use on your headlights? They seem like a mirrored gunmetal color, looks almostlike the factory CTR headlights.
  8. I

    2012 accord seats

    Pretty sure people said the same thing about the 2nd gen acura cl seats, but those are roughly around the same time period, and we got those to bolt right in pretty much, and the side airbags will still work. Even if the 8th gen accord seats bolt up or are welded in you would still have to...
  9. I

    What'd you do to your accord today?

    Grabbed these from a junkyard $250... Got everything wired up and bolted down, even the airbags are working no problem. Grabbed the rear leather seats for $65, they probably will have to be repainted with leather paint, but I have to find a leather armrest and door panels to...
  10. I

    03 CL type S seats

    More good news the 02-03 Acura TL/CL seats are practically direct swap into all 98-02 Honda Accords even with side airbags, if you dont have side airbags then you dont have to worry, for the ones with side airbags the only thing that has to be done for the SRS light is to swap the OPDS unit in...
  11. I

    Swapping seats from EX to EX (side airbag issue?)

    Those seats will bolt right in no problem, since you car did not come with side airbags there wont be any sensors looking for the side airbags only the driver(in the steering wheel) and the passenger(in the dash) just dont do anything with the 4 pin connector with the blue, green, black, and...
  12. I

    03 CL type S seats

    The cl seats pretty much bolt right in. Trying to figure out if I can use the side airbag in the cl seats for a 2002 accord ex which already has side airbags. The connector for the airbag itself will connect and looks exsactly the same, but you need to plug in the opds unit and the seat belt...
  13. I

    FS: OEM Honda Sport Sunroof Visor

    I'll give you $50 shipped right now.
  14. I

    03 CL type S seats

    Got them all figured out the drivers seat you send 20amps to the solid red and solid blue wires and 7.5amps to the white/blue and solid yellow wires and ground all the black wires. The passenger you send 20amps to the solid red and white/red wires and 7.5amps to the white/blue wire and ground...
  15. I

    03 CL type S seats

    3 of 4 holes lined up on mine also, if you grind the 4th into an oval it should fit, also the blue and red wire on the drivers side slice together and run into a 20A circuit and the yellow and white/blue wires splice together and run into a 7.5A circuit, then you ground the 4 black ground wires...
  16. I

    03 CL type S seats

    Which color wires did you add positive to, to get the recline and the up/down motor and everything? Also what did you do about the airbag?

Latest posts

Random media

DSC00778
when i first bought it in oct 2011
643
20150313 165223
1252087476642
Back
Top