Search results

  1. F

    Hey man, my name is Steven and i have seen you post tons on here. If you didnt care to answer...

    Hey man, my name is Steven and i have seen you post tons on here. If you didnt care to answer some helpful questions for me i would appreciate it. I have an old motor that i will be tearing down to see why it had terrible compression in one of the cylinders next week. (its been sitting at the...
  2. F

    Routing for catch can on turbo f23

    so i have researched a baffled non welded an fitting that would allow me to do this at home all DIY. http://www.ebay.com/itm/12AN-No-Weld-Vacuum-Baffle-for-Racing-Vacuum-Pump-w-blue-fitting-/322186132651?hash=item4b03ca3cab:g:GaEAAOSwwo1Xf-wJ&vxp=mtr i could not attach the image due to...
  3. F

    Routing for catch can on turbo f23

    going to look that over today, thanks for the help.
  4. F

    Routing for catch can on turbo f23

    Hey i know this topic has been beaten to death and i read the thread about diy install on the catch can from the PCV valve to the IM. However couple questions. 1) Is it possible to delete the pcv valve and use open port to run to a catch can. 2) I desperately need to vent more pressure from...
  5. F

    Roof antenna removal

    That's what I am hoping, fingers crossed. I will submit a members ride thread sometime this weekend after the car show.
  6. F

    Roof antenna removal

    I believe I will try and remove the antenna alltogether, when I had the headliner down I could not see a bolt or anything under the roof and didn't think too much of it till now. I am going to try not to have to wrap around it. Thanks for the input, much appreciated.
  7. F

    Car is surging/Feels like complete loss of power

    At 4000 rpm the vehicle can go into "limp mode". This has happened to me before, my cause was from extremely low oil pressure from lack of oil in motor. Vtec tries to engage with the oil pressure, and can not operate properly so the motor puts itself in "limp mode". Only when this happened to...
  8. F

    Roof antenna removal

    http://s24.postimg.org/qgheesxph/13471.jpg
  9. F

    Roof antenna removal

    The factory roof antenna for a 2dr. It's in the middle of the roof by the glass on back. Is it possible that this antenna is a an aftermarket one, and I have heard that the factory radio goes through the defroster?
  10. F

    Roof antenna removal

    I know this may not seem like something urgent but I have a car show to go to tomorrow. I am vinyl wrapping the roof and need to remove the antenna. Does anyone have experience with this. Will be tackling this tonight after work, and don't have any time for trial and error. Thanks for the...
  11. F

    Condenser fan doesn't engage

    It would have to since it turns on with the cooling system when that fan comes on as well.
  12. F

    Condenser fan doesn't engage

    My condenser fan does not engage until the car reaches operating temperature. Even though the ac is turned on it will not engage fan. I have checked the relay by hooking up 12v and I hear the click , I have also swapped the relay with a working one and that did not fix the problem. I...
  13. F

    P0505 Car wont idle just dies!!

    Hey guys back again with a headscratcher. A few weeks ago i drove the car in a ditch to avoid a collision with an 18 wheeler stopped in the middle of the road at night trying to do a u-turn. I was mostly at fault since i had dozed off after working 15.5 hrs that day with an hour drive to and...
  14. F

    Stuck in 2nd.

    Ok here is the update! Put on change wire plate and viola! I have all my gears back. Just a tidbit of info, when putting on the change wire plate, i had to take off the thermostat housing in order to get proper angel to install plate. I tried without removing, but i had no luck. It is...
  15. F

    Stuck in 2nd.

    OMG change wire plate. Thanks a bunch! Will be getting this asap. It is missing and I do believe this is what I'm looking for. At least I hope. Will update when I get chance to put it on.
  16. F

    Good ol wastegate question

    here it is simple, you want good parts for certain things. Ebay headlights work just as good as oem (mostly) but ebay wastegates are not in the same quality control standards that more expensive brands go for. they look great function most of the time, but have a much higher fail rate, and do...
  17. F

    Stuck in 2nd.

    one cable is attached to the bracket to allow just the actual wire to move the arm. The other cable is not attached to the bracket therefore when moving the gear lever it moves the entire cable and rod wich seems like it doesnt move the arm. this as of now is what my conclusion is until my...
  18. F

    Stuck in 2nd.

    Ok so there is a possibility of some luck. I removed my intercooler piping (intake side) to get a better look see. I also had to take off the lower radiator hose and move some stuff. I found both cables and i believe one of the cables is missing the retainer clip that holds it in place on a...
  19. F

    Stuck in 2nd.

    Hoping internal Trans problem is not ththe case.
  20. F

    Stuck in 2nd.

    Thanks for the post, will be about 12 hrs or so before I will be able to try and asses it further due to work. I'll be checking on here for more posts and try to respond as I get the opportunity. And to answer an earlier question it does move to the fit and third and 5th positions just the...
  21. F

    Stuck in 2nd.

    https://www.youtube.com/watch?v=24_3FUhPnPE&feature=youtu.beok video is uploading to you tube i took this afternoon on lunch hopefully it give a bit more insight as to whats going on with the shifter/selector. Both appear to be moving but it does not select 1st, 3rd, or 5th. In the video i...
  22. F

    Stuck in 2nd.

    Thank you guys for posting. I'm driving home right now in 4th gear doing 55 miles an hour like I said I live 50 miles from work I will try and take a video if possible tomorrow afternoon after I get back from work because I have to work at 4 in the morning. I do see the shift lever move when I...
  23. F

    Stuck in 2nd.

    Update! Played with shifter in cabin, and found out I have 2nd, 4th, and reverse. All the gears on back side of the shifter but, still don't have 1st,3rd,5th. I looked under hood and took a video of what moves and a picture will try to post that soon. In video I start by putting shifter in...
  24. F

    Stuck in 2nd.

    Hey, so quick story. Driving along going into 3rd, and there is no gear ANYWHERE...lol. seseems like I'm stuck in 2ND gear. 1st is 2nd, 3rd is 2nd...you get the point. Shift linkage? If so how do I fix or is there something I can do to get home live 50 miles from work.
  25. F

    Limp mode - No CEL

    was the motor before the swap a VTEC motor or not. if I'm not mistaken ULEV did not have VTEC. So your wiring harness may not be telling VTEC to engage hence causing the engine to go into limp mode.at least that's just a thought.

Latest posts

Random media

Picture 237
Us
100MEDIA IMAG0203
?? 478
Accord V6 as of April 22, 2010
Back
Top