Search results

  1. L

    2001 Accord H22A4 Build

    Let me see if I can get some pictures and verify my drawing again. Hold tight. Can you fill me in a little more about your build? Your using the stock accord harness Im guessing. What about your ecu, which one are you using? I ended up getting the doctronics mobilizer bypass chip and...
  2. L

    2001 Accord H22A4 Build

    Yeah, I have had it going for several months now. If you see issues or have issues with it, let me know and i will correct the posting. I was learning a lot about honda wiring schematics at the time and getting confused pretty often by terms like, "wire side of female" and "terminal side of...
  3. L

    A/C HVAC for your H22A swap running H22A4 OBD2 ECU

    Wanted to do a short writeup on this. Prior to doing this my condenser and radiator fan would not come on when I turned my A/C on. You need a couple of wire connectors, a factory Honda Diode, some wire and proper tools. Take your accord ecu plug A out. Not your convertion harness plug...
  4. L

    Help please with new/ rebuilt h22a swap burning oil

    Yeah I get the general concept, I have only really known about the purpose of honing for a few weeks though since I started consuming oil. Started reading about proper breakin and I think I scared myself reading about cylinder glazeing. This is my first engine to ever build so I was kind of...
  5. L

    Help please with new/ rebuilt h22a swap burning oil

    Here is a link to the album of pictures from the borescope. https://plus.google.com/photos/113061184166489220171/albums/6115353884033439921
  6. L

    Help please with new/ rebuilt h22a swap burning oil

    So far not a drop. Looking down in the pcv port it's got limited oil in it, I was hoping that would be it. Not that lucky though.
  7. L

    Help please with new/ rebuilt h22a swap burning oil

    I used compressed air and a magnet to get what i saw out. I also got a catch can hooked up on pcv system. The spark plug does look better than it did, before I romped on it for a while the tip of the plug was staying black even. Now, it's closer to what it should be. I may just put a link to...
  8. L

    Help please with new/ rebuilt h22a swap burning oil

    Not sure why videos are cut. I'll have to wait until I can use a real computer not a cell phone.
  9. L

    Help please with new/ rebuilt h22a swap burning oil

    I got a bunch of videos and pictures tonight. Not sure how to post with my cell phone and its past bed time. Walls have distinct hatch marks. There are a couple vertical lines, one could catch a little light but seem shallow. There was a piece of metal depris it looked like too. Evidently...
  10. L

    Help please with new/ rebuilt h22a swap burning oil

    No bore, just hone. I double checked the rings and they are standard. I followed the manual on aligning them. I'm supposed to get the adapter for my phone today and hopefully can snag a few pics this evening.
  11. L

    Help please with new/ rebuilt h22a swap burning oil

    They are standard sized rings, I saved the boxes and will double check. I'm not really sure what spec pressure is for the type s pistons. I have a Spanish manual with the h22a motor in it, I'll try and find it. Pics should come soon. I had to order an adapter for my phone so I can plug the...
  12. L

    Help please with new/ rebuilt h22a swap burning oil

    So I am burning a lot of oil and barely have 250 miles on my rebuild. I really don't even smoke that much, I seem to notice it after idling for a little while and the other day I had it smoking pretty good while in 3rd gear accelerating after engine brake. As meticulous as I was doing...
  13. L

    2001 Accord H22A4 Build

    It's good to hear from people that have done this and kept OBD2 compliance. I just don't read of many doing it or many doing it and posting how they did it. It's good that people know what their options are. Like the Doctronics vs Reflash of Immobilizer. There aren't too many more options...
  14. L

    2001 Accord H22A4 Build

    How to convert 4 wire 6th gen Accord Distributor to Prelude with 2 plug distributor and 1 plug Coil. This was my biggest hurdle in this swap. It took some time but I finally sat down and went over the wiring diagrams for both and now it's straight forward. The only wire not utilized is the...
  15. L

    2001 Accord H22A4 Build

    I am in the same boat as you. I live in Texas and don't have any connections to pass with obd1 emissions either. I will remain obd2. I did get a p72 ecu for future use but I'm in no hurry. This is probably the hardest part of the whole build. I'll list what I know you will or at least what...
  16. L

    2001 Accord H22A4 Build

    Another update. -Got T2W4 LSD trans. Came with JUN lightweight flywheel and shifter cables that I needed. -Competed full 2.5" exhaust, with magnaflow cat and OBX twin loop muffler. It's still too loud so I got a vibrant ultraquiet resonator too. I'll post how it sounds after. -Have the...
  17. L

    FS: 98 sedan V6 partout

    I am interested in all the parts to get my seats heated. Let me know what you can do. If you don't have all of it let me know what you do have please. Thanks, Linden
  18. L

    2001 Accord H22A4 Build

    Another update. Getting close now.
  19. L

    Write-up for 2004-2008 TL rear swaybar swap to 6th gen sedan

    An Allen key? How does this work? The only Allen keys I found were on the back side of the link. 4 little small ones that seem difficult to move, they bent my allen key anyways. There is room to use vice grips and I have done it this way multiple times in the past. Get in there and look...
  20. L

    Write-up for 2004-2008 TL rear swaybar swap to 6th gen sedan

    I appreciate you categorizing me so quickly in the "people like you" group. Never thought I would get there. I did say that I got the acura brackets to be safe right? I agree the bushing is a different size. You may be right about the brackets but I am going to verify to be sure. I think my...
  21. L

    Write-up for 2004-2008 TL rear swaybar swap to 6th gen sedan

    Easy upgrade. I kept the stock end links too. I felt like it was an unnecessary upgrade, plus even more added weight because the moog's are bulkier. Really if I had the extra money I may have got the moog's but I certainly don't have to have them to realize the benefit of this swap. -The...
  22. L

    2001 EX Accord 4 to 5 lug Acura TL Swap with 95 legend 2 piston calipers

    They are an great upgrade. Going from my original 4-lug setup to the TL 5-lug with the RL calipers makes for a lot more stopping power. Its not to touchy either. Normal braking but if I press on it a little harder it stops very quickly. I feel good that I have made my ride safer, especially...
  23. L

    2001 EX Accord 4 to 5 lug Acura TL Swap with 95 legend 2 piston calipers

    Yeah the axles fit no problem at all. Doing an update on this thread too. Figured out an issue with breakpads.
  24. L

    Help with 5 lug conversion

    Performance Tool - Impact Driver Set Part # W2500P Got this at oreilly auto when I was doing my 5-lug swap. It is a must have. ONLY $10. Prior to getting the impact driver I also drilled them out just a little bit and used an ease-out to get it loose, worked well and could still reuse the...
  25. L

    2001 Accord H22A4 Build

    Updated

Latest posts

Random media

just a day out
v6 004 2
...and about 2.5 in the rear
DSC03248a
P1013930
Back
Top