Search results

  1. R

    problem with aem fuel rail and fpr

    hey so just a little background. stock h22 motor, just installed an aem fuel rail and fpr however im running in a bit of a problem after i installed the fuel rail and fpr. initially started the car with the vacuum line that goes to the regulator pinched as the manual stated in order to test...
  2. R

    crank pulley swap?

    f23 crank pulley will fit on an h22 but im pretty sure you need the alternator and ac to come off the f23 in order for the belts to fit
  3. R

    Euro R CL-1 SWAP

    if an h22 p/s pump can bolt up, then use that and weld the p/s line to your existing accord line and reuse your accord ac compressor and use the accord crank pulley
  4. R

    question for those with h22 w/AC

    yea both fans are running when the ac is on. i;ll prolly try to bump the idle over the weekend and see how that goes. thanks for all the help man
  5. R

    question for those with h22 w/AC

    hey drift, my idle is normal at 700, car runs smooth as long as the ac isnt on. also noticed when the ac is on and the temp is anywhere from half to hot, it wont stall but it the idle will still surge up and down a little.
  6. R

    question for those with h22 w/AC

    hey guys, so its been almost a year now since i've had the motor in. i was wondering for those that still have AC on their h22's, does your car idle erracticaly and most likely stall the car when the compressor is on? the ac works great when im cruising, but as soon as i get to a light it...
  7. R

    Hid illusionz group buy on retrofits

    from the emails, its seems he already has 10+ people showing interest, so im pretty sure this GB is happening. i hope lol
  8. R

    Hid illusionz group buy on retrofits

    hey guys im not sure if im posting this in the right section however i noticed Hid illusions is doing a group buy on all gen accords between the months of sept and oct. He needs atleast 10+ people for this to happen. more info...
  9. R

    Power seats in a LX- Help!

    if you have access to a electrical service manual. i would compare both schematics and see whats different from an lx to an ex. see if theres a fuse or something missing in the circuit.
  10. R

    calling all H series gurus

    yes you should be fine with a 98 since its wired striaght to the cluster. the 00-02 goes from the ect to the ecu, then converts the signal to the cluster the 98-99 goes from the ect straight to the cluster. if you want to make sure take a look at the ect on your f23, it should have a nipple on...
  11. R

    calling all H series gurus

    swapping an obd-1 is a lot easier mainly on wiring and more options to tune in the future just a heads up if you do go obd-1, not sure if obd-2 will give you the same issues 1. 00-02 accords have a different temp sensor (circuit) from the h series, so in your case, you will need a ect...
  12. R

    Anyone with a hybrid brake setup?

    how are hawk hps pads in the long run? do they dig in the rotor or cause them to warp overtime?
  13. R

    Fresh Paint

    anthracite grey from the 04-06 TL's are nice too
  14. R

    DIY video on how to change your Timing/B on ur 98-2002 4cyl accord.

    lot of people skip it, hence why i was pointing it out just incase
  15. R

    DIY video on how to change your Timing/B on ur 98-2002 4cyl accord.

    ^^^ DO NOT HEAT UP THE CRANK PULLEY BOLT this can damage your crank seal and will most likely leak oil, unless you are replacing the seal anyways if you are having trouble removing the bolt, get a crank pulley holder and a breaker bar and use some muscle lol
  16. R

    TL switchblade key remote

    btw it looks like the s2000 guys have tried it too http://www.s2ki.com/forums/index.php?showtopic=645799&st=0&#entry14698970 http://www.s2ki.com/forums/index.php?showtopic=429709&st=150
  17. R

    TL switchblade key remote

    the bottom button is actually not a button, if you try to press on it, it feels empty or just nothing there (cant explain it) but i was curious, so i opened it up to see and they basically took our oem board and stuck it in there with a rubber cover over it so press on the buttons. which...
  18. R

    TL switchblade key remote

    lock, unlock and trunk works no panic though and the location of the buttons is exactly the same as your oem remote they basicaly put the oem remote circuit board onto the new remote
  19. R

    TL switchblade key remote

    ^^^ yes thats it. just make sure your car is an EX because i know LX and EX have different frequency's for their remotes here's some more pics
  20. R

    TL switchblade key remote

    well if you have your stock alarm then yes the one that i just bought will work. but if you have an aftermarket alarm then you will just need a generic switch blade key and if immobi is a problem, then you can hack a valet key and just tape the chip to the ignition here some pics btw
  21. R

    TL switchblade key remote

    so i took a chance and ordered it on ebay. came in the mail a couple days ago. took it to the delear to get it cut and programmed.... and it works, both the remote and the key to start the car mind you this is no where close to oem but im happy only issue is the key does feel a bit flimsy...
  22. R

    DIY: Reverse Polarization

    ahhh nvm, looks like i didnt need the sticky one anyways just cut out a piece of the polarize film and throw it in front of the screen (after removing the old film ofcourse :cool:) sorry for the crappy pic not as bright as expected but i guess i can deal with that since i have a blue led
  23. R

    DIY: Reverse Polarization

    so i ended up buying the non sticky film lol what do you guys use to stick this on the screen? or should i just reorder the sticky film?
  24. R

    TL switchblade key remote

    so i was reading up on acurazine and the 3rd gen tl and tsx guys managed to get this to work after "milling" their new keys http://tl.acurazine.com/forums/showthread.php?t=644140&highlight=key+switchblade so is it possible to get these remote fob's to work on our 6gen's?
  25. R

    I need help with the bulbs

    not sure the size on the blue one is but the 3 black pieces beside it are 194's i would assume the blue and the top 2 plugs are 74's but id remove the bulbs from the 2 on the top (just makes it look sooo much better) and the bulb in the bottom center is for your odomoter

Latest posts

Random media

IMAG0132
5227.jpg
my car
094
Shotta # 4
Back
Top