Search results

  1. Snoobly

    FS: Turbo Kit

    Hello all, I'm afraid im reaching the end of the game with the Accord. I'm moving onto new projects. Im selling my entire turbo kit. I would prefer not to ship, but am willing at buyers expense. This is the same turbo kit that Russianred (Nakita) was using, with some extra things added in that I...
  2. Snoobly

    Piston Rings For Boost

    What Piston rings are most of you boosted people running? Still the stock ones or did any of you go aftermarket?
  3. Snoobly

    OBD1 swap is throwing code 4

    Just got the rebuilt motor back in. she runs great except that she's throwing code 4 (ckp problems) and won't go over 3500 rpm. fuel cuts at that point. below that she runs great and pulls nice. Does anyone have any experience with this code? I thought maybe I screwed the timing up by a tooth on...
  4. Snoobly

    Fuel Pump Relay

    Can anyone tell me exactly where the Fuel Pump Relay is located? I know it's under the driver's side dash, behind the fuses right?? Which one? There are like three of them there. Thanks!!
  5. Snoobly

    Sounds like bad wheel bearing, but Isn't?

    Hey guys, Ive got a sounds that sounds like a bad wheel bearing, as in it gets louder the faster I go. It doesn't change pitch or tone when I'm turning though. I have also checked all the wheel bearings just to be sure, besides both front wheel bearing were replaced within the past 10,000 miles...
  6. Snoobly

    BlowBy

    Was noticing a burning oil smell after doing a pull the other day. Popped the hood and oil is all over the engine bay and the dipstick is blown out of the tube. Been doing some research and it seems like BlowBy is what is causing this. I suppose this is to be expected on a boosted engine with...
  7. Snoobly

    Coolant Gauge

    How would one get the temperature gauge working in the 01-02 when switched to OBDI. I can't find much info on it.
  8. Snoobly

    Anybody Interested In Tuning

    Hey guys, while researching tuning and what not for my turbo build, I stumbled across this thread. There is so much useful info in the first and second pages but if you have the time, id recommend reading all 17 pages. Enjoy and feel free to share your opinion with any experience you may have...
  9. Snoobly

    Snoobly's Snail Trail

    Well guys, It's time to spill the secret. I bought Nikita's (Russianred's) turbo set-up. Great guy to work with by the way. Anyways, here are some pics and info. Turbonetics T-15396, T3/T04E, 57 Trim, 0.63 AR, 5-Bolt Exhaust Side Flange Tial 38mm Wastegate and DRAG Cast Iron Exhaust...
  10. Snoobly

    IA Summer meet has been Announced

    IA Summer meet has been announced! 28th and 29th of July in Charlotte, NC at the zMax dragway!! Hell Yeah!
  11. Snoobly

    Nintendo DS and Games

    I've got two Nintendo DS for sale. Both in good usable condition with some scratches (can PM pics if interested). Items listed: Silver Nintendo DS -- $60.00 Blue Nintendo DS -- $60.00 White Zipper Case for Nintendo DS -- $15.00 Black Buckle Cas for Nintendo DS -- $10.00 One Wall Charger --...
  12. Snoobly

    Manual Transmisison Leaking

    Anyone know if part #16 is a common seal to leak...
  13. Snoobly

    Could it be true?

    http://shop.synchrotech-transmissions.com/Synchrotech-Helical-LSD-Prelude-Accord-1992-2002-LSD-H22.htm Could this actually be a legit LSD for our tranny?! :hide:
  14. Snoobly

    Lock/delete please

    delete this thread
  15. Snoobly

    Reverse Lights

    Has anybody figured out how to hook up reverse lights after the manual swap besides what is shown in Badger's DIY thread. I followed every step and i still don't have reverse lights. http://www.6thgenaccord.com/forums/showthread.php?t=15758&page=3 This is the DIY that i followed. anybody have...
  16. Snoobly

    Clutch Engagement Low

    My clutch damper was leaking, so i decided to just bypass the whole system and run a hard line straight from the master cylinder to the slave cylinder. I bought new master and slave cylinders just so i could have the whole engagment system new. anyways, i bled my system and now my clutch engages...
  17. Snoobly

    Difference in EGR valves

    Does anybody know what the difference is between the 4 cyl and 6 cyl EGR valves? My idle is SUPER low at idle (250rpms warm) and i cleaned my IACV, and the port to the EGR valve, but it still sits that low most of the time. Anyways, i went to buy i new one online and clicked the cheapest EGR...
  18. Snoobly

    Cruise Control After Swap DIY

    Hey guys, Ive been trying to find information on how to get my cruise control working after a manual swap. There is nothing out there that i can find, so i took a risk and tried my theory on my car and it worked. i now have cruise control in my manual swapped car. All you need is a wire...
  19. Snoobly

    Weight of auto tranny

    Would anyone happen to know how much our 4 cylinder auto tranny weighs? I searched around and couldnt find anything. I picked it up (somewhat) and I estimate around 200Lbs. anybody have a more accurate estimate? Thanks!
  20. Snoobly

    FS: Parts!! NEED GONE!

    00-02 Honda Accord Manual Trans ECU. $150.00 obo. plus shipping All four Stock Struts and Springs $200.00 obo. plus shipping Clutch Slave Clutch Cylinder $10.00 obo. plus shipping 4 Cylinder EGR Valve. Replaced it thinking it was the problem. It works fine. $40.00 plus shipping Clutch fluid...
  21. Snoobly

    Snoobly's 5 speed swap!

    Hello! I'm in the process of collecting parts for a 5 speed swap. I've got 3/4ths of the parts. Here are some pics and questions. Is this the clutch dampner? 1. 2. 3. Does anyone know which bolts these are? I believe picture 3 is the 1 long starter bolt and 1 long starter bolt, but i...
  22. Snoobly

    1990 Parts swap?!

    Hey! I know if i search i will find out this, but i don't have a lot of time. i just need to make sure all these parts will swap over to my car without too much hastle. i have found i 1990 accord with a manual in it. It's been sitting outside for two years at a junkyard i believe. clutch is bad...
  23. Snoobly

    Tachometer light blinking

    Hello! I have recently converted my gauge lights to LED. Last night on the way home from work the tachometer bulb stated blinking on and off. I got home and made sure that the light was in the socket securely. It was. But it kept blinking. So I switched out tue light and that wasn't the problem...
  24. Snoobly

    installation of ingals camber kit

    Hello! i have just tried to install my ingalls camber kit. is there a trick to removing the bolt out of the control arm chassis connection? the bolt is off center or something. i tried hammering, heating, PB, and cheater bar on the wrench. it turns super slow on one side and doesn't budge on...
  25. Snoobly

    Well... it snowed (is snowing)(56k not recommended)

    Well today here in Iowa, we got dumped on. Last weekend, we got dumped on. So we made the best of it! :) ^dats me :D ^epic fail. haha! pointless thread but its a blizzard out and i'm bored so i figured i'd post some pics :) oh and by the way my buddy and I work on...

Latest posts

Random media

2465.jpg
stretch dash
F23A1 5speed cl/tl-s front strut bar k&n drop-in filter can't see it but its there..
Kenwood Excelon KDC-X693 Blue and Orange
ALWAYS AHEAD...!
Back
Top