1NOnlyAccords Boosted 99'Coupe.315whp!(6.1.13)

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

Also as far as the brace, I'd recommend it. Its cheap and takes maybe 30mins to install using floor jack,jack stands 19mm and 14mm sockets.
Uses factory bolts already under the car.

 

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

few photos updated.More once car is back in my possession.

 

[akoutmos]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

What we need now are pull videos . Congrats dude! Looking good.

 

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

Ill get my friends gopro when we take it to the strip!

 

[Chorilored]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

I am actually running stock FPR with no issues as of now at 306whp.
I can tell the difference it makes pulling the car forward.for example: old set up with Nexen tires I'd roll in 1st gear then punch it, the front would just spin and rock back and forth in the street till it caught traction or I let up.
Now with LSD and Mickey Thompson, I punch it and I'm in the backseat holding on it pulls instantly. Even on street.
We never did find a true answer or oil problem. I cleaned my/changed my vtec solenoid and gasket. I added a gauge to keep monitor, drained old oil that shop used before (don't know weight) so changed it to my normal mobil1 10w-40,the n added alittle synthetic Lucas stabilizer just to see.
Shop never said anything about oil pressure issue again. Now just spark and boost spikes.

14 psi feels great! Instant boost with my 60-1 turbo

Nice! Hope my 245 azenis 615 can do the same with the lsd installed.
I don't see it in your part list but you must have a walbro 255 right? Around 70psi? (Like mine)
Also Aren't you worried running the stock engine that hard will crack the ring lands?

 

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

ah yes,I just added
255walbro in pump-pump.
GM 3bar map sensor.

 

[Steadycrusin401]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

What a sexy beast. I'm sure that exhaust is going to be loud as hell with no resonater.

 

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

Exhaust sounds fine being turbo back.
Im sure if a normal car had straight pipe it would be loud,also the skunk2 sounds deep with my setup.
Thinking about scraping it for the kteller 3" setup with a electric cutout for next build.

 

[Chorilored]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

another thing, do you still have the vacuum line attached to the top of your fpr?

 

[1NonlyAccord]

Re: 1NOnlyAccords Boosted 99'Coupe.306whp!(6.1.13)

yeah it has the small factory line still attached.I had to zip tie it multiple times because it kept popping off during dyno originally.
I was thinking about getting a aftermarket adjustable one with gauge,but car is running fine with stock. Think its decent till 500hp?