FunctionPolice
Member
Def not getting AMR $1.5K and a 2 month waiting period...?
OP not to tread jack. FYI AMR has a lot of coilovers in stock. Also if your a forum member (H-T and others...) they cost $1200.
Choosing my next setup!
- Thread starter Valet
- Start date
OP not to tread jack. FYI AMR has a lot of coilovers in stock. Also if your a forum member (H-T and others...) they cost $1200.
Valet
IS300 SX > Accord
That's not a bad price at all for what you get actually... 
Still out of my price range haha
Still out of my price range haha
Elite1JDM
Well-Known Member
F2's on regular springs. Then save for swift springs!
Good luck
Good luck
G'sAccord01
Well-Known Member
aaahh I don't really care that I won't get much of a drop considering I won't be going for a hellaflush look ... Eventually I'd like to get some TE37 17" (MOST LIKELY) or possible 18" depending on how the car looks after the suspension setup. The roads in upper NJ and NY are horrible as well lolz. I've been doing some research on the Koni yellow and found that thier issue is with under steering on tight corners. Poeple have fixed this by having the fronts at 70%+ stiffness and 90%+ in the rear. (also they they tend to bounce when going around corners if front set to stiff). The springs you choose for this setup is also key. I've heard with Tein its the best. I'd get the S-tech since it provide alittle more drop then the H. I've heard Eibach springs are good but havent read anything about them paird with the Koni yellows .... Just some info for you 
I'm thinking with this setup nd the 17" with some decent tires (minimal stretch if any) it would look pretty good and looking at pricing it would be just about the same as FF2
I'm thinking with this setup nd the 17" with some decent tires (minimal stretch if any) it would look pretty good and looking at pricing it would be just about the same as FF2
Last edited:
Valet
IS300 SX > Accord
Wait... You're saying pair yellows, with s-techs?
G'sAccord01
Well-Known Member
Yea ... Did I read wrong? swapping the spring for a tein s-tech makes it better? the little i've read have switched the eibach spring with a tein
GoldnKnight22
TWM:TLMF
Um, don't bother with the S.Techs. Way too soft in my opinon. And the drop is very uneven. You'd have to have the yellows on the bottom seat and the back in the top seat just to be even. But again, dont bother pairing S.Techs with Konis. 
Valet
IS300 SX > Accord
Yeah I wouldn't do that haha just buy ground controls with the standard eibach coils
SykVSyx
Well-Known Member
ftfy
Valet
IS300 SX > Accord
^ thanks haha
I have a couple questions about the type II's for those that have them.
1: How harsh is the ride really? I would imagine on a softer setting it really can't be that bad.
2: I don't recall. How hard is it to adjust height?
I have a couple questions about the type II's for those that have them.
1: How harsh is the ride really? I would imagine on a softer setting it really can't be that bad.
2: I don't recall. How hard is it to adjust height?
