BlkCurrantKord
Super Moderator
As I said before....
You could just swap out hubs on the fronts. But then you have to get new bearings too. For the price of new hubs and bearings and pressing them on I bought 2 complete knuckles. I recently pressed in new wheel bearings for peace of mind since I had them off the car anyways and they were perfectly fine. If you have rear discs then yes you could also do this as all you have to do is remove the nut, pull the hub off, put on the new one. Unfortunately I had rear drums so that wasnt really an option for me.
You could just swap out hubs on the fronts. But then you have to get new bearings too. For the price of new hubs and bearings and pressing them on I bought 2 complete knuckles. I recently pressed in new wheel bearings for peace of mind since I had them off the car anyways and they were perfectly fine. If you have rear discs then yes you could also do this as all you have to do is remove the nut, pull the hub off, put on the new one. Unfortunately I had rear drums so that wasnt really an option for me.
Last edited: