Wheel Fitment Thread

[fatmatt]

my fronts are also pulled a little though so you will probably have to pull yours and it will rub some too depending on the tire size you run.

 

[99accord boi]

my fronts are also pulled a little though so you will probably have to pull yours and it will rub some too depending on the tire size you run.

215/45/17 achillies im jus gonna roll cuz the fenders a cutting at my 17x7s atm

 

[LeBirdNest]

^ mine do too if i hit a big bump. the rear fenders hit the tire and i am on 16x7s haha my new wheels are 17x7 ill need to pull mine then cause they will be taller.

 

[KO iNfAmOuS]

I wouldnt think you would even have to roll

Or actually correction, possibly +25 offset. I have to check when I go to the shop on Friday, but they're coming with 225/40s or 235/40s.

 

[truWarier02]

Or actually correction, possibly +25 offset. I have to check when I go to the shop on Friday, but they're coming with 225/40s or 235/40s.

With 235's, you'll need to roll.

I would roll all 4 corners anyway if I were you, just in case you might want to fit more aggressive setups in the future.

 

[CleanWhiteHonda]

XXR 962 17x9 Flat Black/Red 4-100/4-114.3 [+35mm]
will i get this to fit ive already got rolled fenders

im goin with 225 so probly mininum streatch
i was mainly concerned with the front

I have the exact same question except i have a sedan and i have not rolled the fenders or anything. I also have coilovers and i want to run as little camber as i can. thanks

 

[sabSquishy]

Did a ****ty paintjob and sort of liked it.

Battles 18x8.5 +30. My rears I know will be no problem and might even need a spacer. Will I be flush on my fronts or a slight poke? I'm already rolled and I ended up with a natural pull over the years. Debating between a 215/40 or 225/40. If anyone has pictures of this set-up it would be well appreciated.

 

[mkdb89-02se]

I have the exact same question except i have a sedan and i have not rolled the fenders or anything. I also have coilovers and i want to run as little camber as i can. thanks

i need to pull my front fenders slightly
thats all

 

[swollen_cu]

18x8.5 +30 would be almost exactly the same poke as 18x9 + 35. So you'll need just to trim bumper tab/bumper, roll front fenders. Depending on how low you want to go, you may need to pull front fenders just slightly.

I'd recommend a 215/40 so you don't have to deal with any fitment issues

 

[JordanFleenor]

Did a ****ty paintjob and sort of liked it.

Battles 18x8.5 +30. My rears I know will be no problem and might even need a spacer. Will I be flush on my fronts or a slight poke? I'm already rolled and I ended up with a natural pull over the years. Debating between a 215/40 or 225/40. If anyone has pictures of this set-up it would be well appreciated.

the fronts won't be much poke. I like my 215/40 but will go with either 215/45 or 205/45 but I like the poke lol. but the rears should be rolled just in case.