ey361995
Well-Known Member
Changed my oil! Castrol GTX ftw 
What'd you do to your accord today?
- Thread starter HondaLuver83
- Start date
Valet
IS300 SX > Accord
So apparently non lumbar seats have different frames...
So I went to my local junkyard and just pulled a whole power and lumbar seat for $50. Then I just swapped the upper from the lumbar seat on to my current one. And put the new cover on that. The result?
After clear coating my bumper... I let it sit the garage to cure. And about an hour ago, I was doing my seat on the other side of the garage, and the wind gusted out of no where. And blew the bumper off the things it was on
it made quite a few marks but I guess it's whatever. Still looks better than what it was, and it'll just get rock chips later anyways. I'll have pics of that later tonight when I put it on.
And I now have a good full power seat if anyone just wants it. Whether it works or not... I don't know
have all the plugs and everything
Edit:
Altogether
More/better pictures soon. Will possibly begin polishing my wheels this coming week and will most likely grab some 20mm spacers if I can't find other wheels I like.
So I went to my local junkyard and just pulled a whole power and lumbar seat for $50. Then I just swapped the upper from the lumbar seat on to my current one. And put the new cover on that. The result?
After clear coating my bumper... I let it sit the garage to cure. And about an hour ago, I was doing my seat on the other side of the garage, and the wind gusted out of no where. And blew the bumper off the things it was on
it made quite a few marks but I guess it's whatever. Still looks better than what it was, and it'll just get rock chips later anyways. I'll have pics of that later tonight when I put it on. And I now have a good full power seat if anyone just wants it. Whether it works or not... I don't know
have all the plugs and everythingEdit:
Altogether
More/better pictures soon. Will possibly begin polishing my wheels this coming week and will most likely grab some 20mm spacers if I can't find other wheels I like.
Brimstone Brown
Well-Known Member
Replaced my rear motor mount. Decided to clean out my iacv also cuz she has been idling rough lately. Just need to put it back together now.
Dukebb23
Duke Blue Devils
I bought Kyle's aka rackedout aka Lebirdnest roof rack from him today.
Now I'm on the hunt for the basketcase and the old school 44" fairing...I knew I should of just bought everything when he had it available.
Now I'm on the hunt for the basketcase and the old school 44" fairing...I knew I should of just bought everything when he had it available.
So it looks like the lever for the seats to go forward is a bit higher on the side of the seat for 01-02 Accords than it would be for 98-02 front folding coupe seats. At least judging from your two little holes and where I think my front lever is.
Looks nice though
LowerMyCG5
Well-Known Member
Did this a few days ago, took out the amber strips from my headlights.
yummyy
ordered tl-s strut bar, and bc coilovers =)
HeffernansF23A
Member
When I restored mine, I wet sanded them using 3000 grit sand paper, then I used 3M cutting compound, then 3M swirl remover, then 3M polishing compound. All with a variable speed buffer. I put a coat of Mothers Cannuba Wax over them to protect them. They look brand new
When I restored mine, I wet sanded them using 3000 grit sand paper, then I used 3M cutting compound, then 3M swirl remover, then 3M polishing compound. All with a variable speed buffer. I put a coat of Mothers Cannuba Wax over them to protect them. They look brand new
pics or it didn't happen.
Dukebb23
Duke Blue Devils
Did this a few days ago, took out the amber strips from my headlights.
Looks a lot better without them Tyler.
When you getting the tint?
Got a almost Brand new old school fairing for my new rack for 60 bucks shipped
The listing was up for 1 hour and a half.
