f20bcg3
Well-Known Member
Water neck
already googled and search no help
- Thread starter f20bcg3
- Start date
f20bcg3
Well-Known Member
Any body please?
Valet
IS300 SX > Accord
You might be on your own man.
Rockgearzz
New Member
Those wires are for the ecu ground on the thermostat housing
Rockgearzz
New Member
and can you please explain how you wired your TD94U dizzy? Im at a stand still as well. I got this dizzy and realized it only has one, 8 pin, 8 wire plug on it. I'm swapping this into an EK civic but the wiring should be about the same.
I opened the dizzy up and theres a sensor inside; it plugs into the coil, and looking at the dizzy with the coil on the bottom, this sensor sits on the top left side. anyway, there's four male pins that the wires plug into. the pin on the bottom side of the sensor (still looking at the dizzy the same way as before). this pin points towards the coil, and there is no wire running to it.
I opened the dizzy up and theres a sensor inside; it plugs into the coil, and looking at the dizzy with the coil on the bottom, this sensor sits on the top left side. anyway, there's four male pins that the wires plug into. the pin on the bottom side of the sensor (still looking at the dizzy the same way as before). this pin points towards the coil, and there is no wire running to it.
f20bcg3
Well-Known Member
well on the f20b into the accord it was color for color from original dizzy and oil pump side to dizzy
F20Bs don't take prisoners they chop faces off!!
