Splash guards/fender liner question

truzzieart

New Member
Joined
Apr 20, 2024
Posts
4
Reaction score
0
Location
Maryland
I have a 2002 coupe that needs both fender liners and the bottom plastic piece that shields the lower engine.

My question is, do sedans and coupes use the same fender liners? I found a full kit for sale on Amazon but it doesn’t specify if it’s for coupes or sedans.

I have a few junk yards around me that almost never have coupes but always seem to have sedans so I’d like to pull the liners from one but only if they’ll actually fit my coupe.

TYIA!IMG_1797.jpeg
 

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,616
Reaction score
165
Location
Fawking, OH
If you look up those last three part numbers, which are Honda OEM codes, do they show as sedan or coupe? Maybe the numbers before those are cross references? Not sure, but could try starting there.

Try searching the site for info on sedan vs coupe fender liners. I am thinking they are different but I have not looked up those in a long time so don't take my word for it.
 

Samtraxx

Member
Joined
Jul 22, 2022
Posts
16
Reaction score
1
Location
New York
Stick with oem, those parts n go never fit right, i bought a set, then threw those out, and got originals...originals will be a little more $ but guaranteed to fit
 

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
10,194
Reaction score
141
Location
Ohio
4cyl/6cyl and Sedan or Coupe doesn't matter for the fender liners, they'll fit either one. They'll fit like crap, but they'll fit. They're the equivalent of melted down trash bags IMO.

The only piece that's v6 specific is the main engine splash shield.
 

Volo

Well-Known Member
Joined
Jan 12, 2022
Posts
46
Reaction score
15
Location
Vancouver, BC
4cyl/6cyl and Sedan or Coupe doesn't matter for the fender liners, they'll fit either one. They'll fit like crap, but they'll fit. They're the equivalent of melted down trash bags IMO.

The only piece that's v6 specific is the main engine splash shield.
So, V6 models have a different fender liner than the other accrd models? Do you have a part # for the driver's side by any chance?
 

snip33r

Well-Known Member
Joined
Jan 25, 2010
Posts
152
Reaction score
15
Location
Mississauga
So, V6 models have a different fender liner than the other accrd models? Do you have a part # for the driver's side by any chance?
Base on the link below, all 6th gen accord have same finders liner (sedan/coupe, 4Cyl/6Cyl). they have same part number for Left and Right side fender. only Fender itself are different between Sedan and Coupe. you will be able to get part numbers as well from the link.
 

Volo

Well-Known Member
Joined
Jan 12, 2022
Posts
46
Reaction score
15
Location
Vancouver, BC
Thank you for your input @snip33r ! That is correct: all fender liner splash guards are the same for all 6th gen accords.
I just put used driver's side (left) fender liner that I pulled out from the wreck yard '99 accord sedan 2.4l into my v6 coupe '02, and it sits perfectly
 
Back
Top