DIY 01-03 JDM Civic Fog Lights

[TriNiCorD99]

these fogs arent really meant for our cars anyway, so your gonna have to cut a lil part of the lower grille to make it fit (all 6thgens). unless your car doesnt have a lower grille... but thats all. if you go back one page you can see what you need to cut.

im all str8 with cutting out a bit of the bumper, and i read all the pages, but just makin sure that the 01-03 civic fogs will work on all of our 6th gens.

 

[Accord Nig]

it will work just need to wire it correctly, ppl with sedans and coupes have done it... preferably better looking for 98-00 not 01-02 imo havent seen anyone with a 01-02 do it. Did any of you guys with coupes have any pics of your gaps between the fog light and the bumper? I wanna see if mine are about the same as you guys. I tried shaving the fog lights to make the gaps smaller

 

[ckinne]

I molded some black abs to the orginal shrouds that came with the fogs and now they mount flush.

 

[Accord Nig]

is there any place that I can tap the trigger wire into so that the fogs do not flash with the corners when pressing the keyless entry? Besides the low beam and high beam. I want them to turn on when the corner lights are on. Any help is appreciated thanks

 

[ckinne]

All you need to do is wire them to the corner lights. They will flash when the you use your key-less entry.

 

[nexTOme]

All you need to do is wire them to the corner lights. They will flash when the you use your key-less entry.

and will it also flash when blinker's on?

 

[Accord Nig]

All you need to do is wire them to the corner lights. They will flash when the you use your key-less entry.

i think you read my question wrong. I don't want my fogs to flash because i have hid bulbs in there. So I'm trying to find something to tap my fogs into that will NOT make my fogs flash but go on when my corners are on, besides low beam and high beam.

 

[ckinne]

I must have read it wrong. I really can't tell you what to do. I just wired my fogs to the low beams. They don't flash when I use my key-less entry and they are as bright as if they were wired separately.

 

[Ironman]

I must have read it wrong. I really can't tell you what to do. I just wired my fogs to the low beams. They don't flash when I use my key-less entry and they are as bright as if they were wired separately.

can you post pics of your set up andalso do you think this will work with a wings west kit for a coupe 98-99 ?

 

[deucescorner]

bringing back this thread, anyone gonna put a pictured DIY soon?