so i spent 4 hours hookin up everything and at the final hour wen it was all done and i was happy for my fogs, they didnt turn on. what did i do wrong? wen i press the foglight button, the button itself doesnt light up. waht do u guys think i did wrong. thx
HELP! 01 fog light installation FAILED
- Thread starter DrOwZee
- Start date
brettg4215
Well-Known Member
first thing i would do is check your ground and power
everything that i ground, i always sand it down to bare metal...
if not that, then just check all your connections.
hope you figure it out though.
everything that i ground, i always sand it down to bare metal...
if not that, then just check all your connections.
hope you figure it out though.
bRaZEn_407
Well-Known Member
Check grounds, as for your fog button, bulb burned out, maybe? On mine the light would stay on at all times, fogs bieng on or off, could have something to do with the relay
hancockd
SLO CG2
are they oem fogs?...
dont quote me on this but i believe the oems will only turn on if you have your headlights on...
dont quote me on this but i believe the oems will only turn on if you have your headlights on...
bRaZEn_407
Well-Known Member
Yes thats true, but thats if your wire the fogs to your headlights
shavedaccord
Well-Known Member
Are they OEM's on an OEM harness? If so there is a plug you need to pull from the driver side fuse box and plug into the harness plug, then another plug coming off the harness plugs back into the fuse box.
what do u mean by ground? and yea thyre OEM i got them off handaasseccesory. i connected everything that needed to be connected.
if its the the plug from harness that comes out of a hole and that was taped up with blue tape then i took off the blue taped and plugged that plug with the plug from my fog harness . what plugs are u talkin about for the plug that plugs into the fuse box?
are u talkin bout this plug?? sry for the pic quality. i used my phone and it was dark. sry again.
and this part comes out from that plug.
does this part goes in the fuse box?
Last edited:
shavedaccord
Well-Known Member
thats what i did. that the second green plug rite. yap i did that. sigh. iono if this might be the problem but at this part
that plug, its grease was all black and dirty. i squeezed in the other plug into it but iono if that dirty grease from the plug that was alrady in the car effects it or not. idk.
and for the plug i took a pic of. i jsut leave that alone rite?
that plug, its grease was all black and dirty. i squeezed in the other plug into it but iono if that dirty grease from the plug that was alrady in the car effects it or not. idk.
and for the plug i took a pic of. i jsut leave that alone rite?
