3 motors later....

[turbo_911]

hahaha nikkita good job blowing my spot!!
Now problem with video is that soon as i get to 10psi, traction says bye bye and wheels start spinning even in fourth gear! So now, i either have to wait till it gets a bit warm or i put on slicks. I could make a video of slidding all over the highway but thats just not my thing to do. As much as it may suck, you guys gotta wait for a few now

just post something at least so we can watch it until you take another one... plz.... lol

 

[cantafordaccord]

http://honda-tech.com/showthread.php?t=2719340

I think he needs to learn to drive the thing first. sounds like he may be a bit too throttle happy!

 

[iHazSnail]

yes! because this is my first time driving my car with 300+whp. how would i know the difference between wheeel HOP, or something was actually wrong with the drivetrain itself. Anywho, first i did think of it as wheel spin/hop but then i realized how the car red lined after boosting in 5th gear and how the car wanted to pull more towards the left. Put the car on the lift today and found out that passenger side axle has play from the trans. It pops out a bit as the wheels spin. Also looked at the ball joints. Both of them popped up and out with the drivers side actually touching the axle itself. So now new axles have been ordered and ball joints too.
I wonder what my next clutch should be..

 

[BlkCurrantKord]

You redlined in 5th gear and somehow popped both lower ball joints?

I really find this amazing....

 

[MikeyMike]

You redlined in 5th gear and somehow popped both lower ball joints?

I really find this amazing....

what axles are you running.. i PRAY that they are not stock

 

[Mojeans69]

What a piece of sh!t.....Shahid you should get rid of it....and i'll sacrifice and take it off you r hands... j/k thats sick!!! keep up the good work

 

[iHazSnail]

driveshaft shop 2.9 were in there but now i ordered stock just so i can roll around till the new ones come in. Mojeans69 you can just buy it off me

 

[MikeyMike]

driveshaft shop 2.9 were in there but now i ordered stock just so i can roll around till the new ones come in. Mojeans69 you can just buy it off me

dont even think about hitting boost with stockers in there... lol.. i needs me some axles

 

[iHazSnail]

axle..

lower ball joint

video is not the best but best i could while trying to hold the wheel

 

[kn0x47]

looks like chuck norris got a hold of your axle