Alignment shop

BkzTafetta

Well-Known Member
Joined
Mar 11, 2010
Posts
472
Reaction score
0
Location
Brooklyn, NY
So i waited 2 hrs in THE ONLY shop that does lowered cars in my and probably most bk, and qnz area....and when they went to put it on the lift the car wasnt even half way up and my frame was already scraping even with wood....so he said he never turned down a car but mine was too low....so i asked him if we could put it on the ground lift and raise the suspension on it then go back and put it on the alignment lift and he said no....So i need a shop that would b able to do this for me...anywhere in brooklyn....i found tkxperformance in LI but the next appointment is on monday....im not trying to wait that long....
 

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
Hes not using a long enough piece of wood. You need like 7 foot pieces of 2x6 and you'll be good.

I've seen alot of 240s and 350z down here make it up my friends alignment lift. You just gotta be careful.

How higher is your fender fromthe ground?
 

knighthawk1104

Well-Known Member
Joined
Apr 15, 2010
Posts
2,256
Reaction score
4
Location
New York City
he's slammed! like 23" im going to check up on this because i need a place to go also...if anything i'll go with you to get my alignment too. but i gotta raise it for winter anyway so i don't know. we'll see.
 

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
knighthawk1104 said:
he's slammed! like 23" im going to check up on this because i need a place to go also...if anything i'll go with you to get my alignment too. but i gotta raise it for winter anyway so i don't know. we'll see.

Wow 23? Shiett you might need to go to a underground pit style alignment shop
 

Vlad02coupe

Well-Known Member
Joined
Jan 28, 2010
Posts
243
Reaction score
0
Location
Chi City
Did you try to lift it with your emergency jack and then slide the lift arms underneath?
 
Back
Top