turn signal problem

[cdubcg2]

hello guys im new to this website, but i really need your help, i know this subject has been covered 1000 times but out of all the research i did i came up with nothing, so here it goes...

a few weeks ago my turn signals stopped working then a couple days later my hazard lights went out, i replaced the turn signal switch, no turn signals, so then i replaced the flasher relay, still no luck ,and ive also checked all my fuses and all of them are good,but what gets me is that when i push in the hazard button i can hear the flasher relay click but still no hazards or no turn signals, so now i dont know what to do so any help would be appreciated

 

[CG6Lemon]

did u do any electrical work prior to this?

 

[cdubcg2]

maybe before i owned it but i havent touched anything

 

[RedRyder]

I'll ask it. Did you check the bulbs?

 

[CG6Lemon]

are the front turn signals busted or the rear? or both?

 

[cdubcg2]

the front and rears dnt work, but if my bulbs were jus blown my green arrows on the inside should still work right?

 

[cdubcg2]

can anyone help me?

 

[RedRyder]

the front and rears dnt work, but if my bulbs were jus blown my green arrows on the inside should still work right?

So have you checked the turn signal bulbs in your headlights/tail lights?

When either the front or back bulb on either side blows (whichever side blows first), you will get the hyperblinker. I've never had both sides out at the same time, but I would assume if both sides of your turn signals are out that your indicator lights in your cluster won't do anything.

 

[cdubcg2]

yea ima try to replace all the bulbs and see what happens

 

[cdubcg2]

its been a while but i checked the bulbs and the filaments in the bulbs look good...any more suggestions?