EX-EXV6 & SE peoples

[F23A1AT]

I need to know if there is a function in the drivers door controls that isn't present in mine. I got my car back from the shop a few days ago and things aren't working right. I looked inside the door and found a few new things. There are now four connectors in the vicinity of the power window buttons. What I am talking about specifically is a small two pin connector with like 20 gauge wires in it. I think my door may have come from a "incompatible" donor. What I know is supposed to be there for LX is power windows, power windows on/off, and the power window movement. Help is appreciated!

 

[RedRyder]

My driver door has both window controls, window lock switch, and the power mirror control for driver/passenger sides. Not sure if that helps...

 

[F23A1AT]

My driver door has both window controls, window lock switch, and the power mirror control for driver/passenger sides. Not sure if that helps...

Not really, but for helping!

 

[RedRyder]

Lol sorry, guess I'm not clear on what your question is exactly. Check with Matt (allgo), he has taken his door apart numerous times and I think his car is an EX. In fact I think he may have his door panel off right now, so maybe he can see his connectors and you guys could compare.

 

[F23A1AT]

Hope fully Matt will see this, I am trying to figure out if my new door came from an EX or something. There is something wrong with the wiring regarding the locks. Some work and some don't depending on the method and the side used to lock/unlock the car. It is clear the door was not from a 98 LX sedan now.

 

[ryan s]

that should be for the "security" LED blinky near the door lock knob.

my locks are dodgy as well...replacing the driver's actuator may solve it, it may not.

 

[Raul]

hoping for Matt to chime in.

I want to see how his door panel looks like too, specially with connectors and stuff. Mine is EX-V6 2dr and the passenger window stopped working.....still could not figure wtf is wrong with that

 

[F23A1AT]

that should be for the "security" LED blinky near the door lock knob.

my locks are dodgy as well...replacing the driver's actuator may solve it, it may not.

It should work just fine since everything in the door is new. As for the LED that sounds like it could be it. The wires are very small.

hoping for Matt to chime in.

I want to see how his door panel looks like too, specially with connectors and stuff. Mine is EX-V6 2dr and the passenger window stopped working.....still could not figure wtf is wrong with that

I'll take a pic or two tomorrow

 

[ryan s]

new actuator as in...brand new, straight from honda?

it's 100% for the LED, unless they unplugged the existing harness from the car, then swapped in a candian one which has a switch for heated mirrors. but how would they get a canadian harness anyway?

 

[2000BlackCoupe]

hoping for Matt to chime in.

I want to see how his door panel looks like too, specially with connectors and stuff. Mine is EX-V6 2dr and the passenger window stopped working.....still could not figure wtf is wrong with that

regulator?