AllGOnoSHOW's SCCA 02 Accord Coupe V6 6M/T

[2000BlackCoupe]

his middle name is, dangerous

 

[98ExAccordwv]

Will that seat bracket/rigging actually pass SCCA tech (if they have tech)?

 

[SykVSyx]

Guess I am the only that thinks there was more to the brackets than that, it's just that that was the pic he decided to share?

 

[98ExAccordwv]

My problem isn't with the black bracket, but with the silver "c" brackets stacked up and holding the back of the black one up to level the seat.

 

[SykVSyx]

As it stands, it is a candidate for a "There I Fixed It" post, but we'll see what Matt as to say when he chimes in.

 

[AllGOnoSHOW]

Yeah crappy pictures. The brackets when tightened all the way look a lot better. That picture was just to show progress.

Everythings done with the seat and steering wheel now. I bolted the seat with locking pieces etc. The finished seat brackets etc are perfectly safe and will pass inspection no problem.

If the brackets stayed like the picture I posted is be an idiot to drive my car. Trust me everything is tight and the c clamps are smashed down with no space. The c clamps were just for resistance order to keep pressure on the mounting bolts. That picture of the bracket like I said was not the finished product just a progress picture

 

[SykVSyx]

^See....I knew there was more to it.

Still sounds like a bit of a 'Kludge' fix, but we'll take your word for it, Mathieu.

 

[GoldnKnight22]

Trust me everything is tight and the c clamps are smashed down with no space. The c clamps were just for resistance order to keep pressure on the mounting bolts.

But the c-clamps are in fact being used as risers for the back of your seat brackets?

Why would you use those?

 

[SykVSyx]

But the c-clamps are in fact being used as risers for the back of your seat brackets?

Why would you use those?

Because race car......

 

[2000BlackCoupe]

c clamps=questionable