Recent content by SpiKeZ

  1. S

    timing belt kit from tasauto

    i wanted to start getting the parts needed for my 100k maintenance. i was wondering whats the difference between the 2 kits they have on tasauto? one sells for about 160 and the other goes for 100. im guessing that its because the more expensive one is oem but the other one says vtec so im not...
  2. S

    HID LIGHT Probs, Weird stufff

    i had the same problem and i thought that my bulb was going bad so i just ordered a new set. since then it never happened again
  3. S

    Noise while driving..SOLVED 3/19/09

    Re: Noise while driving..help! i finally got around to solving the noise issue! BlkCurrantKord was right, it was my right rear wheel bearing that was bad. when i lifted up the car and spun the rotor i heard the terrible noise.
  4. S

    Ok, started my led project, here are some pics

    yep, made sure everything was connected well. the problem didnt only happen in the cluster, it happened for the license plate light and one of the tail lights (the one that takes 168). but like i said, ever since i was more cautious about starting my car without the leds on, none have failed
  5. S

    Cracked bumper

    im not really looking for a perfect fix, im just looking for something that holds it together from behind, blocks water, and does not require me to paint/sand anything. i need it to keep out the water because i have matsu****a ballast sitting right behind where the crack is and i wouldnt want...
  6. S

    HID kit Club!

    what temp are those? i bought some replacement 4300k from ebay after one bulb broke and they now look close to halogen except a bit whiter. maybe i should've gone for 5000k
  7. S

    Ok, started my led project, here are some pics

    im not sure if this was asked before because i didnt read the entire thread but i noticed that the first post stated that the leds were from superbrightleds.com i bought leds from them (the wedge bulbs with 5 leds pointed in different directions) about a year ago. i had to exchange more than...
  8. S

    Post Pics of your window tint

    i dont have any pics but i do have a suggestion: if you want the tints to blend well you should consider tinting the windshield to 50%. i see a lot of cars who have 20% all around (minus the windshield) but when they drive in the daytime it seems like the front two windows are 35% because of...
  9. S

    Cracked bumper

    i have a 02 accord ex. i had previously cracked my bumper near the right headlight which extended about 4 inches. i recently tapped the bumper again and the crack grew to about 7 inches. i want to put some kind of adhesive on the back to hold it together, any suggestions? i dont want to sand...
  10. S

    Noise while driving..SOLVED 3/19/09

    Re: Noise while driving..help! i didnt have time to take a look at the back wheels yet but yesterday i had a passenger sit in the back and she told me when the noise occured, the right seat had a lot of vibrations. ill check out the rear right wheel soon and report back
  11. S

    Noise while driving..SOLVED 3/19/09

    im not sure if this is in the right forum but here goes... a few months ago i noticed a subtle whirring noise that appeared while i was driving. it would become louder during right turns or if i reached speeds of 70+ (going straight). if i was to drive at 50 mph and tugged right on the wheel...
  12. S

    Want Power? Is Nitrous the Way To Go? (Article by FallenAngelHIM)

    after installing nitrous, isnt it preferred to retard the timing by chipping the ecu? i think that would also cost a few hundreds since an obd1 swap would be needed.
  13. S

    Keyless Entry Problem

    is it possible that maybe there is dirt inside the remote that is causing a bad connection to the lock button? how many remotes do you have & does it happen to all if you have more than one? if you only have one remote i would open it up to see if its dirty inside and clean it a little and...
  14. S

    Temperature Needle Going Through "H" and Over

    just because the needle is over the H doesnt mean it can't be overheating..and the leds in your dash probably didnt mess anything up. first thing i would do is check the coolant level, if its low then just add new coolant. you may want to check the quality of the liquid if you have never...
  15. S

    hid kit

    in order to use the 9006 bulbs with that ballast, you would have to open up the ignitor of the ballast (which attaches to the d2s bulb base), then find two points of connection to the d2s bulb and solder wires from there to connect to your 9006 bulbs. from the pic you posted, it doesnt even look...
See more

Latest posts

Random media

Plasti Dip wheels
5160.jpg
IMG 20110221 200542
That custom plastic cover spray paint job tho. >.>
Removed factory hood prop and installed a pair of hood hinges by .........
Back
Top