Search results

  1. turboaccord98

    Rota ik-f fitment

    Yeah I've had my eye on the volks it's just not a realistic option right now.
  2. turboaccord98

    Rota ik-f fitment

    If I wasn't spending $1,300 on a GT3071R I might consider getting the TE-37's. Go to an autoX or racetrack and ask all those people why they have rotas. They look good, they are relatively light and most importantly they are cheap.
  3. turboaccord98

    Rota ik-f fitment

  4. turboaccord98

    Rota ik-f fitment

    Okay well if you think the 235's are too wide for the 8 inch wheel the IK-F's come in 8.5 also but I didnt think those would fit unless I had a lot of nagative camber.
  5. turboaccord98

    Rota ik-f fitment

    The whole point is to run 235's on an 17x8 +44 I just want to know if it will fit. As I said earlier I dont want to be hella flush thats not what I'm going for.
  6. turboaccord98

    Rota ik-f fitment

    I'm okay with having a finger gap so it doesnt have to be tucking tire or anything like that. I know the 235's would be close but I'd like to see if anyone else on the forum had this setup before I spend the $ and have them not fit. I dont see a 17x9 fitting on my car especially since I dont...
  7. turboaccord98

    Rota ik-f fitment

    Hey guys, I've been looking at getting new wheels lately(Rota IK-F). I wanted to downsize to 17 inch and possibly go wider to allow me to run wider tires since I'll be boosting again sometime this year. So my question is would a 17x8 with +44 offset and 235/40/17 tires fit on my 98 sedan? I do...
  8. turboaccord98

    Manual Transmission and Traffic

    I always take it out of gear because like you said it's bad for the throwout bearing and those aren't easy to replace. Plus my clutch pedal is pretty hard to hold down for long stop lights.
  9. turboaccord98

    Putting the baby to sleep

    I was in your situation last year, this year Im taking my car to school. Fortunately for me my parents said if i cleaned out the junk from the garage I could store it there. Definitely disconnect the battery, car cover would be nice too.
  10. turboaccord98

    supercharger vs. turbo pros and cons

    It depends on the size of the turbo but generally speaking 8-10 safely with arp head studs and a good tune with the right injectors. Use the search feature there is a lot of info about turbocharging the f23 on this forum.
  11. turboaccord98

    supercharger vs. turbo pros and cons

    First of all a properly sized turbo is way better than a supercharger imo. If you do your homework you can minimize turbo lag and basically decide where you want your power. with a turbo you have the flexibility of changing boost to almost anything depending on your goals and supporting mods...
  12. turboaccord98

    H23 swap price?!

    I agree with F23A1T. Do it yourself, save some cash and get your hands dirty. Quick search says the h23 vtec comes out of the Accord wagon SIR.
  13. turboaccord98

    Bumper exhaust shields

    Sorry but no. but maybe I'll make a write up on how to make a cheaper fiberglass one like this one. Sorry for the bad picture but this one is just painted black and it doesnt have the little protruding lip thing on it. It's just molded to the shape of the bumper and flat.
  14. turboaccord98

    Bumper exhaust shields

    That will not fit on an accord buddy thats for an evo. I'm the guy who made one and unfortunately thats your only option. I might make you one if you drive up to WA and pay me 50 bucks. :thumbup: [/IMG]
  15. turboaccord98

    What'd you do to your accord today?

    I made it. I'm going to school for composites.
  16. turboaccord98

    What'd you do to your accord today?

    Carbon fiber exhaust shield for my bumper.
  17. turboaccord98

    Flywheel surface rust

    Im gettin it resurfaced tomorrow for 25 bucks.
  18. turboaccord98

    Flywheel surface rust

    Okay thanks for the advice. I definately dont want to pull my tranny again after this.
  19. turboaccord98

    Flywheel surface rust

    Hey guys I got a Fidanza aluminum flywheel from a guy on craigslist. It is brand new but it has surface rust on the friction surface because the guy opened the plastic packaging. My question is does it matter if this gets on my clutch or should I clean it with something? If so what should I use...
  20. turboaccord98

    FS: Turbo Specialties turbo kit

    Bump.
  21. turboaccord98

    FS: Turbo Specialties turbo kit

    I didnt have this exact setup on I had a different fuel system which was vary limiting but my tuner said with this you could run 10-12 psi so probably around 200-215 at the wheels.
  22. turboaccord98

    FS: Turbo Specialties turbo kit

    Okay guys this is my Turbo Specialties Kit up for sale. The reason I'm selling is because I'm turning my accord into a commuter car for college and saving up for an S2000. This kit has about 6-7k miles on it so everything is still in really good condition. I bought it brand new for about...
  23. turboaccord98

    what was your most expensive mod?

    Turbo+tune I dont even wanna add up the cost, I'll get depressed.
  24. turboaccord98

    5 lug conversion DONE!

    Coffee stains peoples teeth, I'm sure it will stain white paint. I would clean that off asap. 5 lug swap looks good though.
  25. turboaccord98

    DoWorkSon's 98 accord ex

    Nice car, clean and simple.

Latest posts

Random media

IMG_20201216_113001[1]
image
IMG00026
6thgenaccord
Hit and Run
Back
Top