Search results

  1. S

    Darius' 04 tsx 6speed UPDATE 3/16

    Also ordered some wheels which should be finished up by vr wheels sometime this week =) 8/5/15 update. If anyone follows me on Instagram (@_deestanz) ypu would know that the tsx is under the knife again Car is currently bagged on truhart airsuspension with a new set of wheels.. Oh nad...
  2. S

    rivet-on fender flares

    Im more wanting to have my front guards pulled, pumped flared as much as the guards can handle. The rears will have the lip pulled a little bit but the rears mostly need to have the lip rolled as 10" wide wheels fit pretty easy on out model but to get 10" wide up the front could be abit harder...
  3. S

    rivet-on fender flares

    yeah bro, Thats actually the exact look n pull im trying to get. Im going to have the front pulled like those ones exactly. And with the rears since its a 4door sedan i new i wouldn really be able to get them pulled out much at all so iv been trying to work out a way to get them pumped/flared...
  4. S

    Heavier coilover springs

    how would i go about working out if i need to revalve my shocks? I was also thinking that the adjustment FF type 2's have could be enough to handle say 10kg rears and 18 or 20kg fronts if run at fully adjusted stiff. What sort of costs would i be looking at for revalving? and is it a job where...
  5. S

    rivet-on fender flares

    its not just getting the guards rolled they will be pumping n pulling them out a fair bit too. I like the wide body flare idea but id rather have my guards all metal and 1 piece. I haven fully decided yet but im leaning towards having them pulled. If i go the fender flares it'll be so i can fit...
  6. S

    rivet-on fender flares

    So i got in contact with a few local guard rolling n flaring/pulling guys yesterday. Iv settled with the guys from Queen St Customs, Iv seen alot of their work at the custom car shows that are around our state and i can say they do top notch work. So I got quoted for $130 to $150 per each guard...
  7. S

    Heavier coilover springs

    so how do you go about revalving the shocks to match the springs? is a job a local suspension guy can do or will i need function n form guys to do it? cheers guys
  8. S

    Heavier coilover springs

    Also where is a good place to buy these swift springs from??? Cheers
  9. S

    Heavier coilover springs

    Can I also use the front 12K springs on the rear Coilovers and then just get new front coils say 14K-16K off swift..would that work?? So do you think if I ran those spring rates with the adjustable dampening type 2 shocks that had 12K front 6K or 8K rears would they be ok if set around max...
  10. S

    Heavier coilover springs

    Hey guys, So I been looking into the VIP stance style a lot lately and Iv seen a lot of guys running heavier springs like 14-16kg fronts and 10-12kg rear springs. I got function n form type 2 on my accord, I'm happy with how mine are but Iv been wondering where do you go to get these type of...
  11. S

    Powertrix rear camber arms

    Hey, So Iv got a set of powertrix lower rear camber arm kit. I'm wanting to get a eye to eye measurement for the maximum safe setting when setup for the most camber they can safely n strongly offer.?? I know it has 9* of adjustment but I'd like a length measurement to work off. Thanks snyds
  12. S

    Jordan_H's 98 Accord Sedan EX (56k)

    hey mate, whats the size and offset of these rims?? How much lip do they have??? looks like 3"-3.5" of lip... cheers. Also did you wrap your climate control in 3M carbon wrap or real carbonfibre?? how did it go around the tighter corners/edges? snyds
  13. S

    front upper control arm contacting body???

    Ok so iv got the front end sorted out sweet now. Just had to grind some metal off the very end of the upper control arm so it cleared the space frame chassis section. Car rides so smooth n solid now. No clunks or noises. Everything is feeling tight and correct and id like to say im very happy...
  14. S

    front upper control arm contacting body???

    Yeah got eBay front camber arms, always planned on going truhart front upper camber arms from the start but I got these cheap as and I'm pretty happy with the quality of the ball joint n bushings that came with it. I should be getting my truhart front arms in a month or so. I just wanted to get...
  15. S

    front upper control arm contacting body???

    so i pulled my front wheels back off today and i found that the upper control arm is hitting the inner wheel arch/strut tower. Tho its hitting in a different spot to where most people cut the holes. its hitting the section basically under the area where the fender bolts on to the main...
  16. S

    front upper control arm contacting body???

    its like when i go over bumps or dips in the road the front end is pretty much bouncing off the ground and then clunking noise.. I double checked everything when i put it all together, everything was tight(nuts n bolts).. The back feels awesome its just the front is real stiff like.. Is this...
  17. S

    front upper control arm contacting body???

    hey iv just put in my function n form coilovers, camber kit front n back and swaybars front n rear. The rear setup is awesome, so smooth n stiff but the front feels abit clunky like. Im wondering if its just the upper control arms contacting the strut tower where iv seen alot of people cut a...
  18. S

    ball joints

    hey guys so iv just put in front upper camber arms and im wondering how tight to do the upper ball joints up.? Iv just done them up tight with a socket set and i noticed the hole for the split pin is below or just level with the castle nut so its only just going to hold the nut from undoing. Is...
  19. S

    Stretched tire size options

    so with flipping n rotating tires would i get more life out of a cheap brand n quality tire or a better quality brand tire?? thanks
  20. S

    Stretched tire size options

    Thanks man good info that last post... Still a while away just getting everything organised. So with running say 7* camber am I better off going with s cheaper brand tire or a quality tire for better wear times? Like which is going to last longer? Il be rotating my tires regularly as...
  21. S

    Stretched tire size options

    Thanks man good info that last post... Still a while away just getting everything organised. So with running say 7* camber am I better off going with s cheaper brand tire or a quality tire for better wear times? Like which is going to last longer? Il be rotating my tires regularly as...
  22. S

    Ball joint removal

    Iv been talking with my dad about putting front adjustable camber arms on my 99 accord. I said they can be a big problem getting the upper ball joint out of the steering knuckle. Has anyone had issues with this on our model cars? And if so is there any tricks to getting the tapered part of the...
  23. S

    Function n form max height measurement

    Hey guys, So Iv just been putting my new complete suspension setup on my 99 accord V6. My main question is does anyone know or have a link to or answer on the maxed out ride height setting for the function n form type 2 Coilovers? I just wanna make sure that I'm running them at a safe height...
  24. S

    Stretched tire size options

    ok thanks guys, after looking around i think a 235/40/18 will work well but il have to wait til i get my rims n guards rolled n pulled before i order then hey.?. i like the stretched look but i think it looks crap when the tire isn't even hard up against the rims lip( kinda looks like it has...
  25. S

    Stretched tire size options

    Hey guys So I'm looking at running 18" x 10" rims all round on my 99 accord v6 sedan. With stretch fit tires, so I'm wanting to hear your ideas on what size Tires you guys run or think would suit this size rim with s mild stretched tired?? I'm keen to see the limit of tire stretch to an...

Latest posts

Random media

Aligning Bumper (1)
5481.jpg
Photo0694
Underglow is still in idc what anyone says
monster massive 2001
Back
Top