Search results

  1. kn106518

    Metal Cranking noice in the front suspension and I DON"T KNOW WHAT CAUSE IT

    ok so i just install the front INgall camber adjustable control arms. I know for sure the that camber kit rub against the fram. But after I grind it down the rubbing is down to the minimum. OK now about 2 days ago until now whenever I turn left or right about 80% till wheel lock when I drive I...
  2. kn106518

    Aligment Problem

    OK ever since i lower my car with F&F2 i haven't done aligment yet. And now i can see that the 2 front tires are wearing more then the outer. So i took to the aligment shop, they told me that they can adjust the toe, but not the camber because i don't have the adjustable kit. So my question...
  3. kn106518

    Helmet for autocross

    I think it is about time I bring this subject up. My question is this. DOES ANYONE KNOWS WHAT is the HELMET SPEC that is require for autocross? Can I just pick up a motocycle helmet? or do i need one with FIre resistant? Please any answer from the pro would be nice. And yes, I am searching...
  4. kn106518

    Need Help with Clutch Pedal

    why is my clutch pedal has no back pressure when i step on it now. i check the slave cylinder to see if there lack of oil, and put new brake Dot3 oil in it as it said on the cap. but still nothing. Now is the Slave cylinder suppose to have a black rubber thing in it? my slave cylinder has a...
  5. kn106518

    Day Running LIght question

    ok so i found this DRL LED 9005 bulbs on superbrightleds.com http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR#880-WHP9 question is, how the hell am i going to wire that crap up to make it day running light? search this forum and get mix up info not 1 DIY anywhere...
  6. kn106518

    clutch pedal stuck how to fix it.

    hey men, my clutch pedal stuck when i'm stepping on it for a short time. for example, when i'm waiting at the light right and i'm stepping on the clutch pedal and i'm still in 1st gear. when the light turn green i let go of the clutch right to go, that is when the clutch pedal stuck, i have to...
  7. kn106518

    Kyowa KR316 VS. Racing Hart Evo C2

    i search everywhere to find out between these 2 wheel which one is better, but i can't find crap anywhere. anyone can give me some opinion?
  8. kn106518

    Need help on where to buy Headlight CLear len

    hey, i don't know if this thread should goes here but if not please move it. Ok so i finish retrofit my headlight, but now the output is like ****, i can't ever see the cutoff line. I search around and i see the member on here some bought a CLEAR HEADLIGHT LEN. I just want to know where to...
  9. kn106518

    HID harness

    hey, i'm doing my HID harness right now, i know a lot of people on here do their own wire. i search around and i know that i have to use 12AWG wire, or so i heard it's 12 guage wire. where do you guys get your wire from? autozone? kragen? i found this website that sell automotive wire but it...
  10. kn106518

    OK another STUPID headlight retrofit question

    ok, i'm about to buy a G35 projector to do my retrofit. and then it hits me that. in order to do the retrofit, do i have to use the stock ballat? cause i see there are HID on ebay that has D2S HID kit. Can i use an aftermarket (ebay, or whatever) HID kit (that include ballats and bulbs) with...
  11. kn106518

    Brake Noise

    OK my brake is starting to make squeaking noice. Ok i understand that when i step on the break to stop the car, the brake may make noice right, that sometime is due to the type of Pad and rotor that i use. I replace my Pad like 1 to 2 years ago, i'm not sure, and the mechanic resurface the disc...
  12. kn106518

    Help me color my Wheel PLZ!!!!

    can some photoshop expert color my wheel for me plz, i'm tire of the black and polish lip. I want to paint my wheel something different, but the question here is what? I was hoping someone can help me color it first to see how it look before i do it. 1. the whole wheel WHITE include the...
  13. kn106518

    Anyone know a decent shop to paint car?

    i need to repaint my front bumper and lip, last shop i went to charge only $100 for the front bumper, but the paint pill off like paper. I mean it thin, i seem like they just spray the paint on and that it, no primer nothing. and the paint is not even match. Anyway, if anyone know a paint...
  14. kn106518

    Crack Lip, HOW to fix?

    well my front ebay lip has a big *** crack. and i don't know what to do to fix it. anyone has any recommendation?
  15. kn106518

    Speaker Upgrade Problems

    Ok first of all, i'm not sure if this thread should be in DIY or Product review. So don't come down on me with that. Ok so my stock car speaker is starting to give me unpleasant noice. So i want to upgrade to something stronger. So i look at couple speakers at local FRY electronic, i saw...
  16. kn106518

    Kn106518 Accord Sedan 99 EX *pic update* (56k beware)

    Here updated Pic with most recent upgrade. Engine DIY Air intake 5spd Tranns Convers Suspension Enbach Rear camber kit Function & Form Coilover type 2 Ingall Front Adjustable Control Arm Tenzo DC 6 Falken 912 Cosmetic Ebay Black Housing Headlight :ohyou: Ebay Rear clear...
  17. kn106518

    H22 swap Smog & Legal question

    OK, so i plan to do the H22 swap into my accord 99 ULEV. I search around the forums and i got mix info regarding Smog test and Legal with CA law. So far i got these info. 1. if i want to do the swap legally, i have to get the motor from a US 99 prelude or newer. 2. All the emission sensor...
  18. kn106518

    Can i borrow someone fender roller? Please

    can someone in Sothern California let me borrow a fender roller? or i'm willing to pay $10 to rent it from ya. i need to roll my fender quick since my car is just lower. ANY HELP WOULD BE APPRECIATED TY
  19. kn106518

    How about a drift accord?

    ok i just wondering why isn't there an accord that is RWD drift car? i mean people were able to conver scion to RWD and AWD to RWD. why not an accord? WOuldn't that be an interesting project to see Accord goes sideway? :kenny:
  20. kn106518

    OK HELP with Skunk2 coilover sleeve plz

    ok So after 3 weeks of waiting my freaking skunk2 coilover sleeve finally came today. But with a ****ing problem. on outside the box that i got it say the PART # is 517-05-0700 Honda Prelude 92-01. and the print # on the FRONT spring is 0700.250.10s. i think it mean 7in height and 10kg/mm...
  21. kn106518

    Local Junkyard in Socal area

    Hey guys does anyone know where is the nearest JunkYard in 714 or OC area where i can pick up some accord and prelude junks?
  22. kn106518

    RETRO FIT, just 1 silly question

    :omgbd::omgbd: ok i think this may have been covered some where else already but i just can't find it. I want to do a retro fit like crazy. 1 question that i always want to ask is that what if i buy the TSX or FX or RX projector. They use D2S bulb right. So can i use aftermarket D2S that come...
  23. kn106518

    New Socal Ricer Reporting In

    What going on fellow 6thgens. I live in 714 area code if you guys wonder where I am in Socal. Ok let me start off saying that this site really helps me out with a lot of things. Things that i shouldn't have done. When i first got my car i didn't want to mod it or anything, just drive it and...
  24. kn106518

    WHich ELECTRIC IMPACT WRENCH good for working on car?

    hey i was looking into buying an electric impact wrench so it would make my life more easier when i try to install my new shock and coilover. I just want to know what kind if good? i found on on HarborFreight.com sell for $50...
  25. kn106518

    MEGAN RACING COILOVER SLEEVE good?

    ok i would like to have you guys opinion on this. I recently bought TOkico Shock Illumina for my Honda accord 99 4dr. Now, I always wanted coilover sleeve instead of the springs cause i want the height adjustment. I look around and most of everyone use either GROUND CONTROL or SKUNK 2. But...
Back
Top