Search results

  1. N

    5sp Swap wiring/ecu problems

    Funny, I am in the same spot as you. I am about to work with the master plug wires to see if it turns over. If so , great. Then i need to sort out the clutch safety switch. I thought it was only a factor if you used cruise control? Any ideas yet? Anyone?
  2. N

    EASY QUESTION Resetting Distributor

    thanks everyone for your help, I knew I could rely on you guys! Hopefully i can repay the favor someday! :favorites13:
  3. N

    EASY QUESTION Resetting Distributor

    YOU ARE THE MAN!!!! THANKS SO MUCH! Now I can get her on the road! How did i not see that?!
  4. N

    EASY QUESTION Resetting Distributor

    Now for the x factor, I don't have the old distributor. I pretty much have a new distributor that needs to go into the engine. But i have no way of knowing which way to twist the little end piece on the distributor, the piece that goes into the camshaft end. Are you saying that I need to...
  5. N

    EASY QUESTION Resetting Distributor

    Im replacing the distributor on a 2001 honda accord 4cyl. I removed the old one but the rotor on the end has rotated some. Im referring to the piece that goes into the camshaft end. the end piece of the distributor can really only go on 1 of 2 ways. Any ideas how to figure the setting on...
  6. N

    DIY: Automatic to Manual Transmission Swap

    Im putting all the fluid in this evening with the hopes of at least starting my 2001 EX after the swap, still need to do VSS HOWEVER::: When looking at the big tranny plug, I see the red and black etc.. When it comes to the gray wire, it is not there. Are you referring to a light baby...
  7. N

    The Legend GS brake swap information thread

    Ok cool thanks for the info. for some reason I misunderstood that the prelude rotor fits for diameter and width. I thought the write up said the prelude rotor would have some gap on the width like 3-5mm ? Feel free to pm me if ur selling!
  8. N

    The Legend GS brake swap information thread

    Bringing it back from the dead. The only thing I cant figure out is if there is a 4x114 rotor that I can use with the 28t legend calipers and bracket? Doesnt it make sense to have a 28t 4x114 rotor versus doing the 23t v6 or 23t prelude rotor? If there is a 4x114 rotor that is 28t size for...
  9. N

    Motor mounts and the mounts

    The mounts are easy to change except for the rear. That's because you will need to take your time and possibly remove the solenoid(if there is one on ours) to help wiggle the mount out. Also use a 2x4 and a floor jack under the oil pan so that you have engine support while changing mounts...
  10. N

    Motor mounts and the mounts

    you should go to PartsGeek.com the seach is way better there also autopartswarehouse.com Anchor mounts are good if your on a budget
  11. N

    Swapping tranny

    You want to know which tranny to use? Use the standard V6 one, or have yours rebuilt. You could do the Type S CL tranny, but its rare, expensive, and still prne to high heat operating temps (this is what kills our auto trannys...burns up clutches) Unless you are needing something heavy...
  12. N

    Interest In Custom Rear Control Arms

    I would be very interested. :iranmaybe:
  13. N

    where to buy wheels?

    ^ I lol'd
  14. N

    Ksport RR for serious time attack

    Shoot i had a caliper pin rust and seize so Im waiting on a part in the mail to replace and get the car back on the ground. Got some quotes for Konis. Looks like $525 for shocks and whatever for springs. Funny the pricing for AMR Koni and KSport are relatively close, however I feel like Koni...
  15. N

    Ksport RR for serious time attack

    Ive heard a lot of great things about the Koni's esp the yellow, and the ground control springs. Im surprised tohear they are suitable for something that demanding! I would love to do that, fyi My car will be off the jacks soon so Ill be able to meet up and check it out. One big concern...
  16. N

    Ksport RR for serious time attack

    thanks for the input!! i actually live here in seattle about 3 hrs away from AMR so he will deliver, but yea im still not sure on wait time. in terms of raceability, would anyone prefer one over the other? why? they actually are about the same in price too. :) Im going to be running the...
  17. N

    Ksport RR for serious time attack

    Hi All, Ive search for a few hours and cannot seem to find any reviews from any of us on the KSport RR Coilovers. Obviously other makes have some reviews however I was shocked at the lack of overall info and reviews on these shocks period... Im building a time attack accord, gutted and...
  18. N

    DIY: Automatic to Manual Transmission Swap

    Do you mean the throw out bearing? I belive you are supposed to install a new one with the throwout bearing tool. Tool comes with clutch kit. Bearing comes from Honda dealership :) Hope this helps....im no expert but I thought Id give a wack :boink:
  19. N

    ESP.net Solid 2/3/4 Point Strut Bars for 98-02 Accord Interest???

    Seattle in the house for sure. I am building a time attack accord right now. So im not too sure on autocross. However I am working with Speedfactory, AMR, speedware Motorsports, on the project. Doing some work in house as well....need a good welder. Trying to work with as many local places as...
  20. N

    ESP.net Solid 2/3/4 Point Strut Bars for 98-02 Accord Interest???

    I Would be interested. My time attack accord is in the roll cage stage, however I would be interested in a 3pt bar made in the USA. I have every bar made for the accord, but a 3 pt bar is one I can find and CUSCO seems to be the best options with the TL-S bar too (which I have lol) How would...
  21. N

    Wheel Fitment Thread

    Its funny you say that. i bought ARP extended studs about a year ago and I have them laying in my closet. I might run it by my buddies shop, hopefully it wont take to long to replace all the hub assemblies since I believe thats what needs to happen to fit the extended studs. or I can repress the...
  22. N

    Wheel Fitment Thread

    Thanks for the tip. I'll get some spacers. I do have amr coils on the way so it should be a piece of cake Cheers
  23. N

    Wheel Fitment Thread

    Thanks for the input. I'll take that as a "they fit" reply. Just when I thought the internet was a cool place again... Go Terrapins!
  24. N

    Wheel Fitment Thread

    Im about 24hrs away from buying a set of 17x8 +47 Work Emotion CR. Ive looked at the stock TL wheels that are 17x8 +45 and other members say they fit the CG3 coupe, flawlessly. I want to know if the Work wheels will fit. I am only talking 2 mm, but i fear I will be super tight to the strut...
  25. N

    Wheel Fitment Thread

    I am about to get P45r's 18x9.5 +15 with 215/40/18 like SC. Anyone know the chain shops that wont be lame about stretching the tire? Im in seattle but les schwab wont do it :( I have search too :tumbleweed: fyi 2001 accord 2dr duh

Latest posts

Random media

2124.jpg
I moved my EX emblems to the TAPE PLAYA
Local Bars/Downtown District Car Show, San Angelo, TX
IMG 20120117 132223
b16a1
Back
Top