I have been looking into the 5 lug conversion for a while now and while on craigslist i found a guy parting out an 04 tsx and he would give me the calibers, knuckles, and rotors for $240. i have been searching and cant fine anything on if they would fit or not. i have a 2000 accord sedan Lx 5spd. any help i could get on this would help me out alot.
5 lug conversion help
- Thread starter epyon314
- Start date
no, they won't fit.
you need the knuckles from a v6 accord for the rear, and the hubs at least for the front...as well as all the brake parts.
http://www.6thgenaccord.com/forums/showthread.php?t=7337
you need the knuckles from a v6 accord for the rear, and the hubs at least for the front...as well as all the brake parts.
http://www.6thgenaccord.com/forums/showthread.php?t=7337
BlkCurrantKord
Super Moderator
Can use TL too I think
I know as a fact you can use the 2nd gen CL parts (2001-2003), and the 2nd gen TL parts (2000-2003). I just wasn't sure if the TSX would work or not so i asked because i couldn't find anything on it. I have found out that just because you cant find anything on it doesn't mean it wont work. Thank you both for your help.
Valet
IS300 SX > Accord
50 caliber brakes 
Steadycrusin401
Well-Known Member
i remember working on a friends v6 lx and the axle were different from the ex v6. 95-97 odyssey knuckles work alsoand they have 11.1'' rotors like the TL but they're harder to find then v6 accords/TL knuckles.
