dumped_accord
Well-Known Member
looks good love the TL wheels
98 sedan on TL wheels
- Thread starter Ccrtech
- Start date
AustinJohnsen
Well-Known Member
car looks great very classy get pics of the inside
Ccrtech
Member
@Mikey
I heated the front springs and modified the front wishbones, I cut one coil off both rear springs...I will say that the car still rides very nice. And it is actually an 02 steering MDX wheel and there were no fitment issues at all, it was the easiest install ever.
@lowermycg5
I have been to Hampton in this car but not to any shows or anything, I was at this years east coast honda meet
@Ryan
I soundproofed my car using a cheaper form of dynamat(roofing insulation from lowes) and jute insulation and a substantial amount of undercoat, I was able to reduce the road noise by about 12 decibels.
As for the shifter I will add the pictures but I will say that it was very difficult to install despite the DIY on v6performance.
I heated the front springs and modified the front wishbones, I cut one coil off both rear springs...I will say that the car still rides very nice. And it is actually an 02 steering MDX wheel and there were no fitment issues at all, it was the easiest install ever.
@lowermycg5
I have been to Hampton in this car but not to any shows or anything, I was at this years east coast honda meet
@Ryan
I soundproofed my car using a cheaper form of dynamat(roofing insulation from lowes) and jute insulation and a substantial amount of undercoat, I was able to reduce the road noise by about 12 decibels.
As for the shifter I will add the pictures but I will say that it was very difficult to install despite the DIY on v6performance.
Mikey
Well-Known Member
What difficulties did you run into with the shifter?
dharding413
Keep it simple.
Great to see some more Richmond members. I go to UVa but but grew up in Powhatan. I'm home for winter break now.
LowerMyCG5
Well-Known Member
I think ive seen you driving around executiove drive, near sentara,
AllGOnoSHOW
Well-Known Member
Definitely classy
