Calling acurazine members

[iHazSnail]

Guys i need to test fit some work vs-xx or meister or prof's on my car to determine correct fitment with my bbk upfront.
Here is the favor that i need. I need someone to start a threat that says test fitment subject is needed and your time and gas and tolls will be duely compensated.
For other details, please pm me.
I'd really appreciate it

 

[eggs]

Snail you don't have a azine account, talk to Justin and Kevin they are well known over there

 

[RedRyder]

What kind of BBK do you have? I have a Rotora BBK, and the A-disk VS-XX's clear the calipers by about 1/8".

 

[bdeitemeyer]

I don't understand why you can't register your own account. Second, if you know the wheel specs there are other ways to determine if they'll fit or not. KSport should be able to provide you with a printable template of the caliper clearance, which you could pass along to the owner of the wheels for him to determine if his wheels do in fact clear without sending anyone on a mission for you.

If you really want me to, I'll drive up north for you. It could get expensive though. lol

 

[RedRyder]

^I think the reason he didn't want to register is because if he did, and that was his first post, he probably wouldn't get much of a response. lol

 

[bdeitemeyer]

Well then he doesn't actually have a specific set of wheels in mind that belong to a particular member of Acurazine. If that's the case, he shouldn't isolate his search to just Acurazine, and yeah...that's just an awkward thread subject regardless of whether it's someone's 1st or 1000th. That's why other methods of determining fitment & BBK clearance are preferred by 99% of people. Being in NY, he'd have better luck talking to friends or other car enthusiasts via Facebook or car shows & finding someone that way. He just needs to print out that template of his caliper & it's a piece of cake from there.

 

[GoldnKnight22]

Shahid, you should definitely join Azine and post it up in the NY/NJ Regional Section. I think people would be more willing to help out someone directly, instead of someone saying "I got a friend who needs you to help him..."

When you post up the thread, I'll be glad to chime in and vouch for you, lol. Someone should be able to help you out.

 

[iHazSnail]

What kind of BBK do you have? I have a Rotora BBK, and the A-disk VS-XX's clear the calipers by about 1/8".

Procomp, 13" 8 piston ksports

I don't understand why you can't register your own account. Second, if you know the wheel specs there are other ways to determine if they'll fit or not. KSport should be able to provide you with a printable template of the caliper clearance, which you could pass along to the owner of the wheels for him to determine if his wheels do in fact clear without sending anyone on a mission for you.

If you really want me to, I'll drive up north for you. It could get expensive though. lol

^I think the reason he didn't want to register is because if he did, and that was his first post, he probably wouldn't get much of a response. lol

this

Well then he doesn't actually have a specific set of wheels in mind that belong to a particular member of Acurazine. If that's the case, he shouldn't isolate his search to just Acurazine, and yeah...that's just an awkward thread subject regardless of whether it's someone's 1st or 1000th. That's why other methods of determining fitment & BBK clearance are preferred by 99% of people. Being in NY, he'd have better luck talking to friends or other car enthusiasts via Facebook or car shows & finding someone that way. He just needs to print out that template of his caliper & it's a piece of cake from there.

Problem with the print out is that ksports changed their design a few months after i got mine and they dont have ANYTHING for me for my specific one.
I know 8/10 acura these days rock TEAL vs-xx so i figured it would be worth a shot.
All the people i know in NY have rwd cars and i think 18x10 for the front and 18x12 in the rear would be a tad much to do which most of rwd people i know have lol
It was worth a shot

Shahid, you should definitely join Azine and post it up in the NY/NJ Regional Section. I think people would be more willing to help out someone directly, instead of someone saying "I got a friend who needs you to help him..."

When you post up the thread, I'll be glad to chime in and vouch for you, lol. Someone should be able to help you out.

yeah the only reason i dont want to is because i dont want to my FIRST post to be HELP A BRODA OUT
But if this is what it takes, then i guess i'll do it later as long as SOMEONE or ANYONE chimes in.
Pretty embarrassing if my first thread has only 5 responses and that too from me bumping the thread over months lol

 

[bdeitemeyer]

Well if you decide to make a thread on AZ, I'll say something in it to vouch for you...I'm sure others will as well. Don't be shy. lol

It sucks that KSport changed their caliper design after you purchased yours. There has to be a way you can make your own template from scratch though. *scratches head* They should have had a template for that design you have for others that were interested in purchasing it, I doubt they just deleted all their files after updating their calipers. Someone at KSport can help you, it just might be difficult finding who that person is.

 

[iHazSnail]

Started a thread in the NY/NJ sub forum. Lets see how far this goes