crossfire
Well-Known Member
Battery, spark plugs and fuel pump all working.
I just got home from pulling a P1607 error code (EGM/PGM Internal Circuit Failure) at O'Reilly's.
When I got home I reset the code and tried starting the car and it wouldn't start. The starter is cranking, but the engine never starts. The check engine light did not come back up. My key light is blinking as I try to start.
I was thinking it could be a bad key, but neither key works so if anything I would suspect a ignition cylinder problem.
Can anyone chime in on things to try/check?
I just got home from pulling a P1607 error code (EGM/PGM Internal Circuit Failure) at O'Reilly's.
When I got home I reset the code and tried starting the car and it wouldn't start. The starter is cranking, but the engine never starts. The check engine light did not come back up. My key light is blinking as I try to start.
I was thinking it could be a bad key, but neither key works so if anything I would suspect a ignition cylinder problem.
Can anyone chime in on things to try/check?