Got a few things done recently:
I cleaned up the valve cover before putting it back on, I'm happy with it.
I did not do the Rear Upper Ball-joints. I'm going to leave those for the tech at work.
I also noticed the Passenger Rear Wheel wouldn't spin free and was getting significantly hotter than the Driver's Side. Going to have the tech diagnose/replace the caliper in that corner while he's in there.
Should be on the road within the next few weeks!
- Finished VC Gasket
- Oil Change
- Transmission Fluid Flush
- Repaired the loose heatshield
- Replaced Rear Swaybar Bushings
- New Rear Pads/Rotors
I cleaned up the valve cover before putting it back on, I'm happy with it.
I did not do the Rear Upper Ball-joints. I'm going to leave those for the tech at work.
I also noticed the Passenger Rear Wheel wouldn't spin free and was getting significantly hotter than the Driver's Side. Going to have the tech diagnose/replace the caliper in that corner while he's in there.
Should be on the road within the next few weeks!
Last edited: