DIY 9005 Conversion

[Mmblvl5]

just did it and i love it

 

[Totalimmortal]

It's some good stuff!
































positive rep plzkthx

 

[atarikid07]

Have you read the thread at all? ALL 9005 bulbs will require SOME modification.

Sorry about that. I thought 9005's were different from Xtravisions. My bad...

 

[Totalimmortal]

It's cool. Just read next time.

 

[98accordlx]

i think the needle nose pliers way is the easiest and fastest way to go about doing this. once you snap one side off by squeezing them together all you have to do is grab the side that didnt break with them and move it side to side and that side will snap off too

 

[xi0utlawstarix]

so much easier just using 9005 female connectors and some old 9006 bulbs

 

[f23accord2000]

the whole reason behind the 9005 and 9006 the 9006 has a cap on it which restricts light so you wouldn't want to use an old 9006 bulb those have caps on them

 

[xi0utlawstarix]

you will have to break the old 9006 bulbs, solder the 9005 female wires to the metal terminal or whatever it is.
so now you would have 9006 bulbs connected to 9005 female (soldered to 9006 old bulb), connected to oem 9006 female harness.

 

[Mmblvl5]

just did it again with some PIAA 9005 high beams and omg its so bright

 

[dynasty]

you will have to break the old 9006 bulbs, solder the 9005 female wires to the metal terminal or whatever it is.
so now you would have 9006 bulbs connected to 9005 female (soldered to 9006 old bulb), connected to oem 9006 female harness.

huh?! haha. you just need a 9005 bulb. solder the small clips inside the socket of the 9005 bulb. then plug it into the harness. or maybe i'm just confused.