UPDATE 2/27/14
Ok did some work to my baby got the fitment pretty much were u want it now , im in love with her all over again lol. Ended up going with the yonaka motorsport one-piece coilovers for a super deal and i couldnt find anyone else with them yet do i figured i be a Guinea pig.the specs are identical ff1's and they ride just like ff1. Also did the CL type S RSB i had in the garage for a year, it rides so good now.
Wheels are 17x9 +30 offset, Bbs/enkie 92 knockoffs, stretched with 205/40's
Hey guys got a new iphone so my camera game is on point lol. Did a lil work on the accord, i got tired of the ksports in front too soft. Got a set of used skunk coilovers sleeves from my cuzin and fabbed em to fit my setup. Ride is way more stiff up front a lot better.i have it raised a lil up front due to my lower control arm bushings being shot. Those are getting swapped in a couple days. i got an ebay front lip and mocked it up for some pics. Its currently unpainted, and got a set of oem fogs of ebay . Took a lil trimming and monor fabbing
Of the bumper but i think i did a good job and they look good. Lemme know wat u guys think.
I KNOW I KNOW NEEDS MORE LOW IM WORKING ON IT
Hey guys. Havnt been too active on the forum in a while just don have th time anymore i thought i share my car with u guys all feedback is greatly appreciated. Its a work in progress. If u dont know its a 98 accord 4dr v6. Was stock forna very longtime . Just put on ksport lowering springs last weekend. 2.5 f 2.25 r.
Then i picked up a used set of acura cl-s wheels (factory chrome option) paired with new toyo proxes4 205/45/17
Tell me what u guys think
UPDATE: 4/8/13
i was lucky enough to find someone somewhat close by with a wrecked 03 TL-type S . i managed to snag the front upper strut bar, the rear lower sway bar with bushings, and a spare type s rim to exchange one of my bend ones. all for 100$ i think i got a good deal for em. got bored and didnt wanna have em black like everybody else. .. so i decided to spray paint em duplicolor mettalic grey, and used high temp wheel clear cloat. 3 coats paint . also a fresh as fcuk sticker under another 3 coats of clear. came out pretty good to me...
heres after the install
pls post like or dislikes. all is appreciated.. thanksss
Ok did some work to my baby got the fitment pretty much were u want it now , im in love with her all over again lol. Ended up going with the yonaka motorsport one-piece coilovers for a super deal and i couldnt find anyone else with them yet do i figured i be a Guinea pig.the specs are identical ff1's and they ride just like ff1. Also did the CL type S RSB i had in the garage for a year, it rides so good now.
Wheels are 17x9 +30 offset, Bbs/enkie 92 knockoffs, stretched with 205/40's
Hey guys got a new iphone so my camera game is on point lol. Did a lil work on the accord, i got tired of the ksports in front too soft. Got a set of used skunk coilovers sleeves from my cuzin and fabbed em to fit my setup. Ride is way more stiff up front a lot better.i have it raised a lil up front due to my lower control arm bushings being shot. Those are getting swapped in a couple days. i got an ebay front lip and mocked it up for some pics. Its currently unpainted, and got a set of oem fogs of ebay . Took a lil trimming and monor fabbing
Of the bumper but i think i did a good job and they look good. Lemme know wat u guys think.
I KNOW I KNOW NEEDS MORE LOW IM WORKING ON IT
Hey guys. Havnt been too active on the forum in a while just don have th time anymore i thought i share my car with u guys all feedback is greatly appreciated. Its a work in progress. If u dont know its a 98 accord 4dr v6. Was stock forna very longtime . Just put on ksport lowering springs last weekend. 2.5 f 2.25 r.
Then i picked up a used set of acura cl-s wheels (factory chrome option) paired with new toyo proxes4 205/45/17
Tell me what u guys think
UPDATE: 4/8/13
i was lucky enough to find someone somewhat close by with a wrecked 03 TL-type S . i managed to snag the front upper strut bar, the rear lower sway bar with bushings, and a spare type s rim to exchange one of my bend ones. all for 100$ i think i got a good deal for em. got bored and didnt wanna have em black like everybody else. .. so i decided to spray paint em duplicolor mettalic grey, and used high temp wheel clear cloat. 3 coats paint . also a fresh as fcuk sticker under another 3 coats of clear. came out pretty good to me...
heres after the install
pls post like or dislikes. all is appreciated.. thanksss
Last edited:
