Front Hubs

[4door accord02]

so what i have so far :
-v6 front calipers
-brand new hubs for rear
-5x114.3 Icw rims


so im think im just going to wait around til i can get my hands on the front
knuckles..my scraper yard has a v6 accord and a 98 acura tl. so ill check them out this weekend
what years can i use from acura tl's for the front knuckles??

 

[xi0utlawstarix]

if i go the new hub/bearing route.. is the job pretty difficult to do from my garage with proper tools?

It's easy with the proper tools, even without a hydraulic press. I was going to do it myself, but $110-$120 worth of tools vs. $20 for shop to press it in and out.

you will need FWD wheel bearing adapter kit, bearing separator, 2 jaw puller and some other hand tools.

http://htarchive.org/showthread.php?t=2685054

http://www.honda-tech.com/showthread.php?t=1567042

http://www.carolinahondas.com/insta...7886-diy-front-wheel-bearing-replacement.html

 

[4door accord02]

It's easy with the proper tools, even without a hydraulic press. I was going to do it myself, but $110-$120 worth of tools vs. $20 for shop to press it in and out.

you will need FWD wheel bearing adapter kit, bearing separator, 2 jaw puller and some other hand tools.

http://htarchive.org/showthread.php?t=2685054

http://www.honda-tech.com/showthread.php?t=1567042

http://www.carolinahondas.com/insta...7886-diy-front-wheel-bearing-replacement.html

thanks for those links..makes a lot more sense just to bring over to shop to press in and out... or get my hand on both knuckle assemblys