Full DIY 01-03 JDM civic fog lights install

[001Stunna]

Take a look at my pic/diagaram above. One wire goes to the fusebox, two are grounds(one in fusebox and one anywhere you can ground under the bumper) and one goes to the battery. You just got to hook it up to the positive battery terminal. Depending what battery terminals you have (ring/multiple outlet block)
ie. i have something like this

..so i just put it in one of the slots and tightened it.
ie. the stock ones are like this somewhat

You just got to connect that red wire to the positive battery and that's it.

I'll get you some engine bay pics in a bit...left the camera in the car :$$

 

[ktown98]

i got the stocker one. can i just attach it to any part of the metal touching the positive terminal?

 

[001Stunna]

Well any way you attach it, make sure its secured and tightened somehow.
Pics below...

 

[ktown98]

got it all hooked up a while ago. took her for a spin and they are great! gotta adjust the beam projection tmrw though

 

[KO iNfAmOuS]

Why do I feel like this is so complicated now that I ordered them :'(

 

[KO iNfAmOuS]

i take that back...im understand it for the most part now, but Im a little lost on the splicing the two wires and where K goes...in the back of the fuse box? or front? thats where im lost. And you can only have your fogs on if the radio is on?

 

[juicebox00]

the splicing makes it so that the power fr the fogs and the switch come from the same source. and you can have the fogs on as long as you have the ability to have the radio on. first turn of the key. that way you'll never forget to turn them off either

 

[KO iNfAmOuS]

ahhh very true...good idea...now that connection goes into the back of the fuse box right?

 

[001Stunna]

Any ppl who order sets currently from ebay, the company that makes them (winjet) currently makes all wiring kits pretty much all plug and play, no cutting, splicing, etc necessary.
IE. http://www.6thgenaccord.com/forums/showpost.php?p=618360&postcount=282 http://www.6thgenaccord.com/forums/showpost.php?p=622094&postcount=293

 

[juicebox00]

ahhh very true...good idea...now that connection goes into the back of the fuse box right?

yep, into the bottom left slot out of the 4 that are open. i've set up to peoples kits in the last couple weeks