h22a 98 accord

[fr33k]

ok im going to show a couple pics. i still have a few more things to buy such as
fuel pump... not sure what size
a gm 3 bar map sensor
obd2b1(i think thats what mine is??) to obd1 jumper harness
drivers side motor mount.... will be ordered today
boost guage...not sure what the most accurate one is but i dont want to spend too much on it....
stage 2 clutch.... thinking of comp clutch(cc)
this is my lil beast

[/IMG]

[/IMG]


im open to any suggestions on where to buy these parts...
thanks for taking time to read this and and thanks for any and all input...
please dont start a pissing match over this either

 

[jdmcg3]

ok im going to show a couple pics. i still have a few more things to buy such as
fuel pump... not sure what size
a gm 3 bar map sensor
obd2b1(i think thats what mine is??) to obd1 jumper harness
drivers side motor mount.... will be ordered today
boost guage...not sure what the most accurate one is but i dont want to spend too much on it....
stage 2 clutch.... thinking of comp clutch(cc)
this is my lil beast

-walbro 255lp fuel pump
-go with a Hondata 4 bar
-obd2b to obd1, ebay brand will work just fine
-go with a innovative mount
-dont know how many lbs youre gonna be pushing.. but i'd go with stage 3 exedy. and get a new 13lbs fidanza flywheel, from the pic it looks like yours is rusted out












post up whats already on the motor.. like the turbo specs.. and also your plans for what youre trying to do with this..

 

[fr33k]

and btw i do have a p28 ive already got socketed for it. and im going to use the f23a1 transmission on this. or atleast i hope i can get away with using it.im looking for about 300 to 375 hp.
i am also looking to find out where i can find a wiring diagram for the dizzy and if i need to re-wire anything else. or is it mostly extending the wires? or plug n play? i know the dizzy isnt but im wondering about the rest of the engine bay.

again thanks for the input ppls!!!!

 

[fr33k]

-walbro 255lp fuel pump
-go with a Hondata 4 bar
-obd2b to obd1, ebay brand will work just fine
-go with a innovative mount
-dont know how many lbs youre gonna be pushing.. but i'd go with stage 3 exedy. and get a new 13lbs fidanza flywheel, from the pic it looks like yours is rusted out

thanks jdm. yeah its a bit rusty but its mostly surface rust. clean it with some break cleaner and see what it looks like then.
im not sure how many lbs itll hold but i hope to find out soon enough. im thinking about another month or month n a half.
there is a company in greer s.c. that is ordering my motor mounts for me. oem
from a 93 lude. but if that isnt going to work i need to know asap b/c im about to have them order it.

and really? ebay for the jumper?? i figured most ebay stuff was junk. not doubting you.just the way i think.is there a certain company on ebay? or is it all pretty much the same?










post up whats already on the motor.. like the turbo specs.. and also your plans for what youre trying to do with this..

ill give some info on the turbo shortly. i know its a garrett. it has a tial wastegate, greddy bov, and more things i cant think of right now...

 

[fr33k]

its a garrett p/n 466159-5003. i bought it from a friend for a good price.... no shaft play what so ever. just really unsure of the specs on it. i didnt think to ask. i also got the icp thrown in with the turbo.im not complaining for $50. and no it isnt a typo....$50.

 

[fr33k]

if anyone knows how many lbs that turbo can push id appreciate it if you would tell me. thanks in advance

 

[fr33k]

i know im forgetting something,
skunk 2 cams on it as well...cant remember the specs on it...ill have to look for the paper work. ive had this sitting around for some time and just now really getting into putting it all togeter.... 3 inch down pipe and 3 inch exhaust with apexi muffler...

 

[jdmcg3]

i hope those are stage 2 turbo cams.. and not the all motor ones.. you might wanna double check.

and the f23 tranny will be just fine. if not better for boost on a h22.

 

[Valet]

if anyone knows how many lbs that turbo can push id appreciate it if you would tell me. thanks in advance

You can boost it to your hearts content, its how much the engine can handle.

 

[jdmcg3]

Do you really wanna mate a brand new clutch to a flywheel that could be outta spec? If this was a stock swap the. I think it might be alright. But since you're bout to turbo the motor the last thing you want happening is your old, weak flywheel shattering.

And yes all eBay harnesses are good, long as the seller has a good rep. Think about it, it's just wires.

Oh and you don't want 93 lude mounts. Those won't work, at least I've never heard those being used for a h22 swap into a 6th gen. Only mounts that I know of working are the euro r accord and the innovative mounts. Personally I'd go with the innovative kit. It's like 290 shipped.