Halabeaster54's CL Type S 6Spd/J35 Build

[Frisky Arab]

Damm, this is awesome. Subscribed for build.

 

[Halabeaster54]

thanks guys. Today i should start cleaing my engine, tranny ect and getting it ready to be dropped in. Cant wait

Dude it's sick, congrats. Props for doing all the parts collecting yourself, you'll save hella $$ that way. As I said before, feel free to PM me with any questions you may have.

ahhh from the king himself. i wish i could have a build as sick as a build as yours

 

[WHEEELMAN]

Have you ported the lower runners and heads yet?


..adding that 3.7 mani and bigger T/B will yield minimal gains w/o porting the rest of the top end. You need to open the heads up on these J series.

So, if it is in your budget/means, have that pNp work done.

 

[Halabeaster54]

Have you ported the lower runners and heads yet?


..adding that 3.7 mani and bigger T/B will yield minimal gains w/o porting the rest of the top end. You need to open the heads up on these J series.

So, if it is in your budget/means, have that pNp work done.

I'm not exactly sure what my future plans are for my engine so I haven't touched the internals. The only reason I'm using this mani is because I can close my hood without any modifications to the hood, frame, mounts, ect and its just bad ***. It's smaller in size compared too the j32 and j35 manifold. I believe I'm the 2nd one to do this to their 6th gen? The first one was greg, nokblue, and I'm literally doing his exact build. It was his call on the j35a4 rather then the j32a2.

Sent from my EVO 3D using Tapatalk

 

[NokBlue]

.

 

[Halabeaster54]

Nice man. You got a lot of parts pretty quickly. You would save more money doing the swap yourself.

The difference between your and mine is, mines a complete manual swap with a J35a4 and all 03 CL-s 6spd parts (engine harness, ecu, trans, shifter, m/c, clutch, dual mass flywheel, clutch lines, crank and cam sensors, front cam pulley, cams, timing crank pulley). The reason I went with all the 03 CL-s parts is so I wouldn't have to run Richies module. Don't get me wrong Richie is a genus with his module but, if something happens, I want to be able to go to the dealer or junkyard and buy the part I need.

Here's what the J35a4 with the 09' TL sh-awd manifold looks like. (maybe a little motivation for others doing a swap)

(bay is filthy)

Good luck with your build James.

Thanks bro you know I'm gona be hitting you up when I run into problems Lmfao. A shop should be doing the wiring but me and my dads friend who's a mechanic will pull everything out and drop it in.

Sent from my EVO 3D using Tapatalk

 

[Accordman722]

Good luck james! I had some unfortunate things come up so my swap is a no go right now :/ i will get it done in the future for sure tho... if you need any help or questions just txt me whenever man

 

[Halabeaster54]

Good luck james! I had some unfortunate things come up so my swap is a no go right now :/ i will get it done in the future for sure tho... if you need any help or questions just txt me whenever man

Those cf Fenders will be nice

Sent from my EVO 3D using Tapatalk

 

[Accordman722]

lol ill see what i can do dude

 

[Halabeaster54]

lol ill see what i can do dude

Haha alright

Sent from my EVO 3D using Tapatalk