Hello / Headlight Restoration/Retrofit (Update 9-19 pictures added)

[LegendaryT2]

Lol I'm thinking I should get different shrouds

 

[LeAccord]

Grind down the hole of the reflector bucket where you would insert the projector ..

 

[Simkid5614]

Bax will say, and I'll back him up on this, Gently shave off up to 1MM of screw threads on the shroud, It'll allow the shroud to fit further back on the projector. thus clearing the lense, I did it the hard way, and screwed the adjusters down, put the lense on, then aimed after, But now I'm stuck having to paint my shrouds now as the chrome has slowly worn away against the lense.

 

[LegendaryT2]

Bax will say, and I'll back him up on this, Gently shave off up to 1MM of screw threads on the shroud, It'll allow the shroud to fit further back on the projector. thus clearing the lense, I did it the hard way, and screwed the adjusters down, put the lense on, then aimed after, But now I'm stuck having to paint my shrouds now as the chrome has slowly worn away against the lense.

Hmm didn't think of this, this would save time and still be cosmetically pleasing aFter time cuz it's on the backside. Great thanks!!!

 

[Simkid5614]

If the screws dont thread all the way down, Use washers to take up the slack.