x5carl3tMurd3rx
Well-Known Member
can someone unplug their VSS and take a picture of the connector. when we were doing my build we accidentally changed the connector on the VSS thinking it was the IACV plug. fortunately we just pulled the wires out of the connector so nothing was cut. I'm almost positive when we put the connecter back on it, after realizing it wasn't the VSS, the wires were put back into the connector in the wrong order. reason I think this is the case is cause I tested all the wires to be sure there was no shorts or anything and the VSS thats in it is brand spanking new. so I'm thinking it all works its just not sending a signal back to the ecu due to the wires being mixed up.
THIS IS THE LAST THING I NEED TO FIX BEFORE I GET TUNED so please someone do this for me soon. or if anyone knows where i can get a pin out of the connector that would work too.
THIS IS THE LAST THING I NEED TO FIX BEFORE I GET TUNED so please someone do this for me soon. or if anyone knows where i can get a pin out of the connector that would work too.