So i have some free time, and i have all the tools i would need to fab the many parts that will be needed. The question is, what would be the easiest thing to swap a V6 into? im not going to get into a 6sp conversion simply because of the cost involved, but i want to drop it into maybe a civic coupe for ****s and giggles. Problems I foresee:
Ground Clearance, is my first concern, but I guess a good suspension would prevent the exhaust from hitting the ground.
Motor/Tranny Mounts, I know the transmission is on the opposite side, im assuming that a custom mount and some re-wiring would do the trick.
Cooling: how much clearance for the radiator, does it have to be custom mounted, or would it fit?
The only other thing is that It would drive like A$$, given all the extra weight in the front end. I would try to move the engine as far back as possible to help with the COG
What axels would I have to use? Or would they have to be custom made?
Cost to me as of right now? Under $500 for a civic shell, and a 2 24 packs of corona extra $40.00
Last edited:
![IMG 0017[1]](/forums/data/xfmg/thumbnail/1/1858-89c9cc5ba728cb196c4892793be74da3.jpg?1695467879)
